The Amp Garage

Out of all the tubes you have tried did any stick out, as sounding better than the others? Was there much of an audible difference between the different types at all? Which tubes have you tried so far? NOS? New? both? Which sounds best to you so far? Sorry for all the questions! I have set the PI on...

Try this
NEC miniature low signal DPDT 12v sealed
Mouser part# 551-MR62-12USRY

hope that helps some.

The Octal relay base had screw terminals rather than the ability to solder permanately also .

Todd

Those octal socket relays are quite large for the application. As far as the ability to work. If the coil voltage is correct and the contacts are rated high enough, in this case OVERKILL Oh and make sure the coil is Dc voltage Ive watched 12vdc burn up/melt a 12vac rated relay coil. I never knew 12v...

Sonny Landreth has no problem making his dumble sound good with singlecoils. Please dont send him a memo

Is this the one you mean?
http://ampgarage.com/forum/viewtopic.ph ... mer+dlator

Todd

Most of the guys here dont take the easy route and source most everything themselves. I took the easy route I cannot say 1 bad thing about Ceriatone quality. My next project I think I will try to source my own parts. I love the OTS that I built though, especially since its my first born. Unfortunate...

That's good atleast its not noticeable anymore.
I've been eyeballin this traynor that is at a local music store. Its sittin in the back collecting dust for years. Probably needs new caps and some TLC.
If I can a good deal on it it may be my next amp project.

What did you end up doing to clear the oscillation problem?

Thank you for that.
I listened to the album from the reach on my commute to work this morning, man that slide playing just never gets old.
These D-style amps pretty much beg to be played with a slide, they sound so good!

I hear all kinds of poppin and fizzin but I really hope that is the camera mic and not the amp. If it was the amp that would have completely ruined that gig.
my 2 cents

Hi everyone I recently built a C-tone OTS FM50 modern eagle mod. It is the latest OTS offered by C-tone. Out of the multiple OTS's they offer only the mod eagle FM and the standard HRM have a LNFB ( local negative feedback loop ) switch at V1. I have been playing on this amp for less than a month ap...

I have only ran mine above mainly because its easier to keep them away from the other wires. Another forumite here is right now in the process of redoing all his heater wires above rather than below because he was having issues as well, not necessarily the same issues although. Pics would be very he...

If its not the weed it must be the POT :lol: If you built the amp how are the heater wires ran? Above or down on chassis? Inside the amp chassis other than the heaters you should have as much separation between wiring as possible. 1/4 inch is usually enough but any closer and you start getting bleed...

Beautiful work, dig the colorscheme
Forgive my stupidity but what is the switch with all the yellow wires, looks like an impedance switch with like 20 contacts

So Sad man
Hey Boldas I see your in NY check RF's site hes got some dates coming very soon over there. The guy that opened last night was Jonathan Mceuen from OjaI AS WELL and I think hes tourin, betwwen him and RF man that was a fun show