The Amp Garage

Cxx Thats what I thought. Tone stack is fender Princeton. Funny part is i thought this as gonna be a no brainer! It’s basically a Princeton front end into a Deluxe PI and output section cathode biased. I guessing now should have looked more carefully at the PT I used as voltage seems way more that t...

Wpaulvogel

Yes that looks like the place to start to reduce gain. I see that done on some other designs.

Maybe I should have gone with one stage! Thanks

couple of pics

Steven

So sounds like a bigger cathode resistor is needed...

xtian

Sure doesn’t seem like it but I’d have to get my scope out and check this...a whole other situation! Haven’t used it in ages...

Martin

Yup big resistor, I’ll do up a schematic shortly but a 22k to PI and a 10k to the V1.

Gentlemen, I've built 5 amps with help from here, 3 TW, 2 Marshall and all have run great, sound great! I decided to put together a small amp for practicing and trying pedals out with. Simple two gain stage, vol/tone control/ LTPPI and two 6V6. Cathode biased. Both stages are 100K, 1.5K/10uf, .022 c...

Agree!
My Liverpool is way loud. Also really nails the Brian May tone and sustain. It’s a one trick pony but boy what a trick, love it.

Hope to run a two amp setup at some point with a LeLe A/B Y switch...Rocket and a Liverpool!

Miles, Can’t believe there’s a Van Heflin reference here, so funny. No one knows him I’m sure... Mark I think that choke was supposed to go in a Vox AC50 build but it got dumped so I used it in the JTM 50. I got the blue boards from some of your early builds. In fact my favorite amp is a 2 x EL84 ro...

Guys

Anyone build the CJ11 amp? Looking it over what's with all the cold biased stages?
Two are 3.3K and the 3rd is a 4.7K...
Most Fenders I looked at are easy 1.5K biased.
Are those correct??

Miles

Sir, you're saying add this MV after the CF before the tone stack with no clippers! Yeah looks pretty easy...
Thanks...

Norbury I built a model 1987 20watt 6v6 combo too. That little bugger is also loud, but a different sound from the JTM 50. The plexi 20 watt has a switch to bypass V2a with a cap so that adds to the crunch there. Plus the 1987 had split cathode for V1 and I parallel the channels with separate volume...

Gentlemen, I had some parts laying around and found that they would work out nice for a JTM 50 build. So I went at it with the junk I had... V1 A+B shared 820R and 10uF A Shift pot, 50KB, with a 33K resistor (ala Miles idea thanks) for the slope V2B no bypass cap PI Plate both 100K Mixing resistors ...

Nice, very nice. Just add some solder!!

Steve

Sorry I meant more VOLTAGE than I have....

Where you get those cermet pots?