The Amp Garage

need 5 9pin sockets for the LTP.

*edit, I see you would willingly nix the Trem. I'm out, can't advise such shenannigans *

on twin triodes, it's even easier to spin the socket and enter to the 4&5 through the gap.
super tidy

I built a 2204 head a while back. It is at my mentor's house now. He is optimizing it for single coil pickups, and detests the 2204 tonestack (poor separation and too much high mids), lastly he's going to hack in my Clark Amps add-a-verb and a small reverb tank. looking forward to the end result. sh...

daaang

sounds cool.

[quote="MickeyP73"]@JJman, good catch. @andyfromdenver: I am honored by you checking in! :wink: Sorry to hear you got annoyed, I really liked your thread and appreciate your efforts. It was the best/clearest info on the internet I could find on adding reverb to a Champ. Thanks for the insight on the...

[quote="Firestorm"][quote="andyfromdenver"]I hadn't revisited that thread as some members of tdpri annoyed me and i left for here and some guys here annoy me so i am not going to post often.[/quote]
Our loss, probably.[/quote]

my loss. I like to share stuff, but I'm sensitive etc.

also, since it's my work you are going from. I don't like your tone cut option. do what i did and put two values of resistor off the bass pot on a pull switch. a mid cut and mid boost. it's better imo. and just live with a little pop, it's not like you are gonna be running over and doing it during r...

glad you like/d my thread op. The 400 ohm resistor is to drop B+. The original goal/ challenge is to retrofit this in an actual Fender Champ. hence losing the tube rectifier to help accomodate two additional twin triodes. with a change to solid state rectification, your resultant DC voltage will be ...

[quote="xtian"][quote="andyfromdenver"]if you'll take "any" idea, I suggest taking it to someone who fixes amps. You tried a tube swap and no dice. An aside, your head cabs are very nice.[/quote] Uhh...... Mike, sounds like they burned out a power tube, right? So check the grid and screen resistors,...

if you'll take "any" idea, I suggest taking it to someone who fixes amps. You tried a tube swap and no dice.

An aside, your head cabs are very nice.

...

...

...

...

...