The Amp Garage

Thank you guys, yes i can read the schematic and just use that. I just wanted to cut corners and go faster : ) just to see what that thing sounds like. I guess my excitement of finding that unused board got deflated when i realized it was a 75 I'll probably just harvest the salvageable parts and mov...

Hello, I just got a fully populated fender eyelet board. After looking at schematics and pictures it looks like it is a spare from a Fender 75. While it is enough info to follow the schematic it would be great to have access to a layout/wiring diagram. Do you guys know if there is a service manual o...

Thanks for that link, it's quite nice but it is almost like a new build. Changing the speaker and the bypass were a minor mod but a big improvement in sound.

Thanks for the help, i ended up changing the speaker and bypassing V1b and it is a lot better

I just got one of those amps, it works but it is a little underwhelming. Are there any not too major mods worth trying that you could recommend .
Thanks
francois

Gabby Enterprises

may be something like this would work
http://www.badcatamps.com/unleash.html

Ok i'll wait to see what Smokebreak says but may be i'll try it anyway

Did you end up changing the parts that you had in your schematic on page 6.

Thanks Martin

It looks good, did you get a chance to listen to your circuit

Thank you, i'll try that.

Sorry to ask again but what would be the ideal load if the output is 4 or 8 ohm. Do i still go with 25 ohm or should i lower the value

For 16 ohm output you recommend 25 ohm load
what about for 4 or 8 ohm output what would be the ideal load

The Alembic is using a Stancor PS-8415