The Amp Garage

hello. you were right. i have step down trnasformer which gives 125v and i think that is main reason for everything.
when tubes loaded it plate is about 690.

OK and wha about this high plate voltage?

i dindnt do it with the power tubes. im dont want to blow them so i havnt install them.

the wiring u mentioned before is like this?
http://www.thevintagesound.com/ffg/sche ... layout.gif

Thanks for explanation! its not the PT center tap, its the OT center tap

OK thanks very much for your help! and for fast answer too. I have cleaned everything, replaced sockets, replaced everything in the power sectiong, rectifier circuit was for nothing so ive build the other one. the voltages are the same and during the build i discovered that if i remove the OT center...

well yes the pin 3 is completely disconnected. and the wiring inside the amp is like on th schematic. but what about this 10w resistor? and grounding one of the filaments?

ok im going to test PT outputs and let you know. Is there any way to modify the power supply to drop the voltage? ive removed everything and cleaned the repainted the chassis as it was. i will start rebuilding everything 2nt and let you know of the progress. Found the pictures on the net. This is a ...

Hello, i have picked up an univox u1511 all tube amplifier from 70's. so im restoring it to the original state and want to make it usable for gigs and etc. Ive found schematics on the internet http://www.4tubes.com/SCHEMATICS/Music-amps/Univox/u1011.gif and they says everything is the same as the u1...

Thank you all for quick reply! I have some ecc82 and 81 tubes so ill give them a try!
My transformer is classic tone for deluxe http://www.classictone.net/40-18087.html

is it possible to try 6l6 with it? and do i need to change anything or just to swap tubes and rebias?

Thanks again!

Hello
i've built dlite 22 and it is playing great with speaker g12 65 creamback, but sometimes i find it too dark and too gainy! is there a way to get more clean from it and any way to change this dark temper?

Thanks in advance

Hello! Is there any final schematic to this amp? I would like to take it for my next project!
)

And do u know values of these resistors?
thank u very much for ur answer!!

Does anybody know how to put pickup loading selector in D lite like two rock did it in studio22 ?
Thanks in advance and Best regards

Did u manage to add fx loop? Can u send me some schematics and layouts or pictures of your realization ?

thanks in advance

Hello,
ive recently build the d lite 22 and it is working like a charm, i have room in my chasis and i wanted to add tube buffered fx loop. Is there any way, any schematic or layout, which you will recommend, of doing this?

Thanks in advance