The Amp Garage

I have multiple amplifiers (buffered, unbuffered loops or no loop at all) and one pedalboard. I simply wanted to be able to switch between the two without doing anything to my pedalboard. if you have real estate it’s probably easier to just get a true bypass looper pedal and insert it into the sign...

I have multiple amplifiers (buffered, unbuffered loops or no loop at all) and one pedalboard. I simply wanted to be able to switch between the two without doing anything to my pedalboard.

Good morning all, I have a mini klienulator on my board right now and it is working very nicely for my D style amp. I was wondering if anyone has ever tried to add a bypass switch so its effectively a junction box that can be easy to plug into a regular FX loop. Any tips on how? http://tagboardeffec...

martin manning wrote: ↑Thu Dec 09, 2021 8:06 pm More like this...

One last question - should I be using shielded wire between the v1 and the DPDT as well as the DPDT and the input jack? or just the longer run between the DPDT and the input jack? I am planning on mounting the DPDT right in the back pretty much directly behind where the V1 is.

The PAB will have less of an effect dependent on the tone control settings. I also find that it has less impact between the OD and clean but it is all dependent on the drive/level and tone controls. You should still hear a difference with he OD on though. If you turn the TMB to minimum does the PAB...

Hey all! As the title says - on the clean ch the PAB is pretty drastic (sounds quite good), but when I activate the PAB with the OD ch also engaged the PAB does pretty much nothing. Is this normal? Any way to lessen the boost on clean ch?

ah! Thank you!!!!

Thank you! while im sitting here at work, I whipped up this very rough drawing. Does this seem right?

I am looking to add it to a toggle switch since the d'lite doesnt have two guitar inputs. ... Would I be able to implement this and put the 'foot switch XLR' on a mini toggle instead? Sure. You don't need the relay either then? If not, see the schematic diagram (.pdf) at the link you posted above. ...

Hey all, I need to source a ODS FET board for my Brown Note D'lite - anyone know where I can purchase one? Also, I am looking to add it to a toggle switch since the d'lite doesnt have two guitar inputs. I came across the below image (from here https://ampgarage.com/forum/viewtopic.php?f=5&t=31084) W...

I always wondered what was going on in those. How’s the pickup loading sound?

Just to close the loop on this, I got the pedal back from Fuchs and spoke with them. The high voltage chip (that converts 9 volts to 300) wasn't working. They swapped it out with new one, and it worked as it should.

Pics!

Just an update - I figured out how to make the rock jazz switch work with my current relay. I have the switch wired like the Bluesmaster in the files section, but in order to get around having to gain access to the other half of my relay (since there are no solder lugs on the board) I ran the PAB re...

I figured out my pilot light issue - I’m using the heaters now instead of the 120v wires. As far as the relay goes, I’ll admit I didn’t know how they functioned. I did some reading last night and it now makes sense WHY the PAB needs to be hooked up to the rock jazz and how. That said… I think I need...