In the diagram the switch is set to fast ( higher gain) mode.
https://ampgarage.com/forum/files/Expre ... iation.jpg
Search found 2979 matches
- Thu Apr 25, 2024 2:31 pm
- Forum: Trainwreck Discussion
- Topic: Why did it take me 15 years to try a 12ay7 in my Liverpool?
- Replies: 8
- Views: 514
- Sun Apr 21, 2024 3:26 am
- Forum: Technical Discussion
- Topic: Illinois brand capacitors still bad?
- Replies: 10
- Views: 351
Re: Illinois brand capacitors still bad?
What makes you think the problem is exclusive to the Hot Rod series Fender amps? Something I recall reading about some time ago. May be just internet lore, but maybe Fender did end up with the bulk of the bad product from that era. Yeah, it’s hard know if they are still bad. I would rather have mor...
- Sat Apr 20, 2024 1:39 pm
- Forum: Trainwreck Discussion
- Topic: Help me Rocket Men
- Replies: 7
- Views: 476
Re: Help me Rocket Men
The output transformer is quite an old version. It has a 5.5K primary from memory and it is quite loud. I remember RJ’s was quite full on. I thought it was in the vein of Richie Hall’s amp. https://youtu.be/HHiJrufUbF0?feature=shared https://ampgarage.com/forum/viewtopic.php?t=30033 https://cdn.shop...
- Sat Apr 20, 2024 1:11 pm
- Forum: Technical Discussion
- Topic: Illinois brand capacitors still bad?
- Replies: 10
- Views: 351
- Sat Apr 20, 2024 1:09 pm
- Forum: Technical Discussion
- Topic: Illinois brand capacitors still bad?
- Replies: 10
- Views: 351
Re: Illinois brand capacitors still bad?
This problem was specific to Fender amps manufactured over some range of dates, and limited to IC electrolytics sold to Fender, IIRC. Great to hear from you as always Martin. I appreciate your input. I must admit that I don’t know if the bad IC brand caps were limited to Fender. Perhaps if there wa...
- Fri Apr 19, 2024 8:59 am
- Forum: Trainwreck Discussion
- Topic: Help me Rocket Men
- Replies: 7
- Views: 476
Re: Help me Rocket Men
I think that will be your biggest challenge finding the right parts. The parts of greatest concern are the transformers. I would build it on a Garolite board, phenolic boards can be conductive and you don’t need that. https://modulusamplification.com/wrocket-top-boost-30watt---4-x-el84-head-kit-3229...
- Fri Apr 19, 2024 6:09 am
- Forum: Technical Discussion
- Topic: Illinois brand capacitors still bad?
- Replies: 10
- Views: 351
Illinois brand capacitors still bad?
In the past I’ve seen quite a few fender amps with IC branded capacitors which are leaking, I dare say quite a techs made a good living replacing capacitors from Fender amps.
Have IC caps turned a corner and become reliable or do they still leak?
Have IC caps turned a corner and become reliable or do they still leak?
- Mon Apr 15, 2024 2:48 pm
- Forum: Technical Discussion
- Topic: Yet Another Two Stroke build
- Replies: 11
- Views: 341
Re: Yet Another Two Stroke build
I probably would look for something like this Hammond output transformer. https://www.hammfg.com/part/1628SEA If you disagree that’s fine, but I would like to know why. It is touted as a Hi Fi transformer, but I don’t like Class A amp with rubbish bass response generally. From my experience this tra...
- Mon Apr 15, 2024 5:30 am
- Forum: Technical Discussion
- Topic: Measuring filter caps performance.
- Replies: 4
- Views: 138
Re: Measuring filter caps performance.
Measure the leakage at rated DCV. Measure the ESR. Measure the capacitance. Look for deformities. Fairly simple, but it takes time. It can be done by lifting one leg with care, and can be done using the amp's power supply when you have a variac and use a series resistor for current sensing. Right, ...
- Mon Apr 15, 2024 2:31 am
- Forum: Technical Discussion
- Topic: Yet Another Two Stroke build
- Replies: 11
- Views: 341
Re: Yet Another Two Stroke build
]The Two Stroke seems a strange amp to me. The tone control on these amps is nice but it does mean the amp loses signal so it doesn’t have the same break up as a Champ. I don’t know why the second 1.5K cathode resistor wasn’t bypassed by a 5uF to 22uF cap for extra gain and a 47 ohm tail resistor pu...
- Mon Apr 15, 2024 2:14 am
- Forum: Technical Discussion
- Topic: Measuring filter caps performance.
- Replies: 4
- Views: 138
Measuring filter caps performance.
It’s not a question I thought I would be asking but here I am. I use the ESR-70 to determine the condition of the filter caps. I have mentioned this online and been roundly told this tester won’t determine if the cap is leaky and I should simply replace the caps. I tend to think if the cap was leaky...
- Mon Apr 15, 2024 1:14 am
- Forum: Marshall Discussion
- Topic: Raspy treble from 2203 amp
- Replies: 6
- Views: 286
Re: Raspy treble from 2203 amp
That master volume mod doesn't actually help, I did some tests on this a few years ago with a spectrum analyser and found it made no difference. But YMMV. Dave Friedman puts a 500pF cap across the cathode follower 100K, lowers the first coupling cap to .0022uF, adds a 22uF to the final stage cathod...
- Sat Apr 13, 2024 2:02 pm
- Forum: Marshall Discussion
- Topic: Raspy treble from 2203 amp
- Replies: 6
- Views: 286
Re: Raspy treble from 2203 amp
Mystery double post.
- Sat Apr 13, 2024 2:02 pm
- Forum: Marshall Discussion
- Topic: Raspy treble from 2203 amp
- Replies: 6
- Views: 286
Re: Raspy treble from 2203 amp
I used a EVH MIM guitar, and I also used my Strat. The box is a Fender Bassman box with Kendrick Blackframe speakers in it. I have previously used the box with a 1959 and it sounded fine. The speakers aren’t overly bright.
- Sat Apr 13, 2024 11:56 am
- Forum: Marshall Discussion
- Topic: Raspy treble from 2203 amp
- Replies: 6
- Views: 286
Raspy treble from 2203 amp
I plugged into my friends 2203 and it sounded dreadful. It was overly compressed and the treble is raspy. The compression was due to the 100K cathode follower resistor measuring 880K. I replaced it and the amp sounded much better. The amp still has raspiness which goes away when I turn the volume up...