Well upon further review the footswitch I have is 3-wire. Red Black White- 2 foot switches 6 lugs each. The amp wire is 4 wire-red white black and shield.
Looks like a real hack job on the interior.
Lots of fun to restore!
Search found 5 matches
- Tue Jun 13, 2017 2:00 pm
- Forum: Technical Discussion
- Topic: Gibson Falcon Footswitch Wiring
- Replies: 9
- Views: 1988
- Wed May 31, 2017 12:19 pm
- Forum: Technical Discussion
- Topic: Gibson Falcon Footswitch Wiring
- Replies: 9
- Views: 1988
Re: Gibson Falcon Footswitch Wiring
No receptacle at all, wire goes directly into the chassis. Looks like it was re-wired. No receptacle, no plug, just wire. Ill make do with a simple two button.
Thanks all for the help!!
Thanks all for the help!!
- Tue May 30, 2017 10:15 pm
- Forum: Technical Discussion
- Topic: Gibson Falcon Footswitch Wiring
- Replies: 9
- Views: 1988
Re: Gibson Falcon Footswitch Wiring
I should have noted the cable came with no pin. Just cable. I'll work something out with the 3 wires and shield and two simple footswitches and the diagarm provided earlier.
Thanks for the help.
Thanks for the help.
- Mon May 29, 2017 6:19 pm
- Forum: Technical Discussion
- Topic: Gibson Falcon Footswitch Wiring
- Replies: 9
- Views: 1988
Re: Gibson Falcon Footswitch Wiring
Thank you. Very helpful.
- Mon May 29, 2017 3:28 pm
- Forum: Technical Discussion
- Topic: Gibson Falcon Footswitch Wiring
- Replies: 9
- Views: 1988
Gibson Falcon Footswitch Wiring
Anybody tackle one of these? I picked up a Gibson Falcon 19RVT-no foot switch. Footswitch wire is 4 conductor-red-white-black-shield. Schematic?