The Amp Garage

Speedypancake wrote: ↑Sun May 19, 2024 7:45 pm Thanks Neskor. Do you have any audio / video clips of the results of that mod??

Unfortunately not
you can try, you will not be disappointed for sure

I moded my Guyatone TD-1 pedal and now sounds great in front of the Marshall Plexi.
Replaced ECC83 with ECC82 and removed cliping diodes and replaced 470pF capacitor with resistor.
Schematic looks something like this.

it looks like transformer made by Heyboer

Did you maybe try V6.2 version?

You have something lake that: Boss Waza TAE

more pictures

no schematic available, as I know
check the picture for internals

check here

If put all the results in this online calculator step-down ratio looks OK
https://www.hagtech.com/loading.html

If I apply 400hz AC signal 1V RMS on secondary, on primary I'm getting 26.65V RMS, so it should be OK with 6.5K/8R relation

With 1Khz C settings and from Ub+ to secondaries I'm getting 1440pF

understand that, but is the same like inserting voltage on primary and measure sec. , calculate by hand? did you check and confirm ? :P put 1khz C setting and try from Ub+ to secondaries.. should be around 1-5nF if is good trafo, if doesnt measure try via normal multimeter, on C selector, usually i...

hi neskor, can you explain what exactly you are measuring = 6.5k ohms here? when you have this trafo on hand , how much is parasitic capacitance between P and S? any tap is ok 6.5K is primary impedance with 8R on secondary I tried to measure parasitic capacitance between P and S but results vary to...

Roe wrote: ↑Sat Oct 14, 2023 7:52 am on the 15 ohms output arrangement, not the 7/8 ohms out?

it is measured on 8 ohm tap with 8R resistor on secondary