The Amp Garage

I have been working on a Peavey Delta Blues with the 2x10 combo cabinet and it seems to buzz on top of certain notes being played. I have checked all the caps and the voltages are in the ballpark with the schematic. I have gone through the amp several times with no luck, I did notice that the PCB wa...

Thanks for the reply, While they look nice I do not think I am going to use them because they are not that functional for the application I need. I am mounting a chassis into a combo cabinet. I did happen to find some brass screws at the hardware store that should work.

Best Regards,
Brian

This is not a very technical question, however has any one used the Decorative head screws for mounting chassis to cabinets? They look nice but do not seem to functional, being how there is no slot for a screw driver. Any special tricks can be done to keep from marring the decorative finish? Best Re...

Interesting gearhead, Those electrons are mysterious buggers, I can definately feel them flowing!!!

www.whole-tonemusic.com

That does work fine unless the space is too tight to get the length of the drill into.

If your planning on doing a lot of fabrication I would definately recommend the greenlee punches. They cut clean and are easy to use, with proper care and oiling they should last a while. The unibit is good for the home DIYer however it leaves a fine metal curls attached to the other side that must ...

Your welcome LeftyStrat, any little thing helps, I know with me I get aggitated when i have to untangle a bunch of wire, this is so much easier. Now if we can find a way to keep our patch cords organized!! As I look at a rat nest full of cables in a bag and ponder the thoughts, hmm. Is there enough ...

Hello All, I have a small bench that i do builds, repairs & mods on. So efficiency is a priority. I found a great idea on DIY channel for storing wire that i thought i would share with you all. Save your old screw on plastic containers ( peanut butter container works good) Run them through the dish ...

That's funny, My wife usually says "Isn't that loud?" I must be going deaf!! thnx John, I will look into them.

Thanks John,
I will check out the specs on it, whats important is the sound, and from what you mentioned thats the sound I like, Hows the top end sparkle with the Naylors?

Oh man, I try to keep the SR away from the children. I do alot of things different now since I have children, I remember when they were crawling around and grabbing the guitar neck on one of my guitars that was set up with a double locking floyd rose. I started stringing the ball end through the nec...

Since we are on the topic of resistors, I came across some Carbon Comp NOS resistors. Are they really any different than the new production carbon comps? besides price.

The punches leave no metal spurs, very clean cut . Does that justify the price? That's up to you.

I put a couple of AlNiCo Tone Tubbies in the bottom and have the original speakers in the top, However I would like to preserve the originals and add a couple newer speakers to the mix. I am thinking of going with a couple Weber's.

I wanted to get an opinion on what your favorite speakers are in the vintage BF Super Reverbs and why?

The Oxford 10L6
The Jensen C10R
The CTS 10"

Thanks all.