The Amp Garage

Hey Thanks for posting I was going to try this out, do you have a schematic or a parts stuffing list for like r1 values etc..

Great project I finished my build over the weekend amp works great and is dead quiet I used r39 for my standby switch I also did not have those fuse holders so jumped over them really cool project I used a really big chassis 17x10x2 but I had lots of room to mount the board and not have to cross mou...

quick question

What is R39 for and what do you have in there?

I cant tell from the pics

Steve

DUH I see now Thanks much easier

Sorry I have not been on Forums in years I did not realize you had to host images see if it works now..

I used some stand offs with 4/40 screws on both sides so I can take the board off easily when I get the transformer in

Just an FYI, I am going to build the 5F6 in a mojotone JTM-45 chassis, I got the board mounted just need to figure how to mount the OPT and choke..
wish me luck and thanks for the boards

Hey just FYI I used your loop and reverb boards in one of my test amps, I had a major buzz hum with the reverb board on the 6.3 line, I was curious how you rectify and ground the heater supply when the center tap is raised to a positive DC voltage? In my amp it did not work well at all, which makes ...

Tristan I built the loop board into another amp I had, it works great and sounds as good as the tube loop in my big amp
Thanks,I plan to try the reverb in the same amp..soon..

you know downloading that whole source as a zip file then working on the folders, has fixed the issue with KICAD too, something about how I was building my own folders and zips was wrong, I even tried some of the older gerbers and they load just fine on JLPCB, I must have fat fingered something or j...

That worked I even was able to use JLPCB and I have the same image on screen, of the reverb board,
I must have been doing something wrong with the files, or making the zip
thanks are the reverb I assume the reverb and loop cards are two different cards right?

Steve

also on the KICAD thing I domwloaded the project files and get all sorts of errors trying to open the pro file, some are related links at github, t know much about kicad I had just downloaded the newest version and installed it.

Maybe I am doing something wrong here, I am trying to download the gerbers as you have them on github , put them in one folder and make a zip file they upload the zip file, usually the automated system can read the file and even shows an image of the board, on JLPCB that is not happening. I also tri...

Could you please kindly provide gerber files in RS-274X format?

this is what JLPCB said about the files..

Hi, I was trying to zip up the gerbers and upload them to JLPCB, for some reason they dont fit the format, Also I am interested in your reverb board, and did not see gerbers for that, Anyway just FYI I was having no luck with what is on GIThub I am also brand new to KiCad and had no luck importing t...