Search found 8 matches

by Greenback25
Tue Nov 08, 2022 3:06 am
Forum: Technical Discussion
Topic: Preamp Safety Measures (Incorrect Transformer Input Wiring)
Replies: 12
Views: 973

Re: Preamp Safety Measures (Incorrect Transformer Input Wiring)

The insulator is melted. It's dead. This transfomer needs to be replaced 100%? What would happen if I would rewire the input wires correctly and then turn it on again? Would the transformer melt again or worse? What about the safety hazards inside these preamps: Are there any lethal voltages left a...
by Greenback25
Tue Nov 08, 2022 1:06 am
Forum: Technical Discussion
Topic: Preamp Safety Measures (Incorrect Transformer Input Wiring)
Replies: 12
Views: 973

Preamp Safety Measures (Incorrect Transformer Input Wiring)

I have a guitar preamp with a toroidal transformer that was wired incorrectly for the European wall outlets. As I fired it up, the sound was there for mere seconds, and then smoke came out of the preamp. Parts of the transformer insulation melted: https://i.imgur.com/xCVmR8d.jpeg Would you say that ...
by Greenback25
Tue Nov 03, 2020 2:02 am
Forum: Dumble Discussion
Topic: Global & Local Negative Feedback Mods for ODS #102?
Replies: 14
Views: 1374

Re: Global & Local Negative Feedback Mods for ODS #102?

Well, I thought the switch would be off if it's facing down, at least that's what the amp builder told me. You're telling me now that it's exactly the other way around? I'm a bit confused to say the least. The picture doesn't lie, so it has to deactivate the mod in the up position, like this picture...
by Greenback25
Tue Nov 03, 2020 1:31 am
Forum: Dumble Discussion
Topic: Global & Local Negative Feedback Mods for ODS #102?
Replies: 14
Views: 1374

Re: Global & Local Negative Feedback Mods for ODS #102?

This is how the GNFB switch looks inside the amp: https://i.imgur.com/oHISFhz.jpg SPDT function dictates that the upper and middle parts of the switch are activated when the switch faces up. These upper and middle parts are connected to the rest of the amp, whereas the lower part is not, which means...
by Greenback25
Mon Nov 02, 2020 10:09 pm
Forum: Dumble Discussion
Topic: Global & Local Negative Feedback Mods for ODS #102?
Replies: 14
Views: 1374

Re: Global & Local Negative Feedback Mods for ODS #102?

Well I can only think of the opposite being an issue. If the GNFB is engaged and you're hearing odd noises, then you've got the OT leads reversed phase so you're creating PFB instead of NFB. That can sometimes be a horrid howling noise, others be a more subtle sound like you're getting. Have you co...
by Greenback25
Mon Nov 02, 2020 8:20 pm
Forum: Dumble Discussion
Topic: Global & Local Negative Feedback Mods for ODS #102?
Replies: 14
Views: 1374

Re: Global & Local Negative Feedback Mods for ODS #102?

That part is very easy. You need a spst switch you put it inline between the source of the feed for the negative feedback and it's next point, and connect the two leads of the wires to either side of the switch. toggling it either completes the circuit or disables it. If you're talking the GNFB on ...
by Greenback25
Mon Nov 02, 2020 7:51 pm
Forum: Dumble Discussion
Topic: Global & Local Negative Feedback Mods for ODS #102?
Replies: 14
Views: 1374

Re: Global & Local Negative Feedback Mods for ODS #102?

I already saw that schematic. What I'm interested in are the local and global negative feedback mods that can be engaged via switches. Are there any schematics for that?
by Greenback25
Mon Nov 02, 2020 7:24 pm
Forum: Dumble Discussion
Topic: Global & Local Negative Feedback Mods for ODS #102?
Replies: 14
Views: 1374

Global & Local Negative Feedback Mods for ODS #102?

Does anybody have the schematics for the standard global and local negative feedback mods for Robben Ford style Dumbles?