The Amp Garage

I believe he means to bypass it like this. I added the cap to block DC, and the bypass switch to get the full 1 Meg for "normal" mode from any partial-bypass setting. There will still be some effect from the tone controls with this bypass technique. Oh btw 1 meg is still a pot right so I can change...

Now perfectly clear thank you!

Well after reading Hasserl's tone stack bypass method it made alot of sense to me and wanted to implement it. Am I doing it right? Here is the method Hasserl explained: https://www.thegearpage.net/board/index.php?threads/gradual-tone-stack-bypass.2112653/post-29830804 Here is my shitty paint edit, b...

sergio wrote: ↑Tue Apr 23, 2024 11:16 am I have the schematic of the signature reverb type 1 and it's a bit different.

I did not hear about this one

Bump :/

Perhaps the gain structure switch may be the same one documented in this thread (although that says CLRS v3)? Repeating here: I checked inside a [Two Rock] CLRS V3, the gain structure switch is 1M/(47k/113k/80k) divider. Resistors [are] 47k,33k,33k ... It is place where the 68k/1m divider is placed...

Here is what Two-Rock said to me " there are differences between our current Classic Reverb Signature and the legacy Classic Reverb amps. ...Here are some of the changes; thicker aluminum chassis, proprietary output transformer with improved half power capability, 3-position gain structure switch, s...

That C"L"RS thing will probably drive me crazy soon enough

What was that lol?

rccolgan wrote: ↑Thu Apr 04, 2024 9:23 am CRS v3 built in 2011 s/n 44. Someone posted this on the two rock Facebook fan page last night. Hope this helps some.

Isn't this the Custom Reverb Sig? I'm mostly curious about Classic Reverb Sig

One last thing guys, did I implement the mid boost right or should I change it? Edit: Nevermind I placed it wrongly on feedback loop. Should be on treble cap

Thank you so much! Would be really helpful

And I've found Studio Signature's detailed guts which is supposed to be 35 watt version of the amp(minus rock jazz switch, tonestack bypass and fet). Don't know if it is true or not but this one can probably help too.

Hello guys, anyone has got the schematic of the current production line of the amp? (With gain structure switch) Post a gut shot if you have one. Shouldn't be too hard to trace. IMG_2642.jpeg This is what we have as far as I know, thank you for helping! EDIT: Found more shots of Classic Reverb Sign...

I don't know anything about Two Rock amps. Have you asked Two Rock for a schematic? The schematic you posted looks very similar to a ODS Low Plate Clean section. Look at the #124 schematic and you should see the similarities. I think they probably won’t want to share it. I based it off the one that...