The Amp Garage

Hi Dana,

You wouldn't happen to have one more PCB available would you?

KC

mcrracer wrote:I don't see 534-198 on that Mouser page.

He probably meant 534-918

Here you go...

http://www.mouser.com/catalog/catalogUSD/642/1561.pdf

Better late than never Glen

I like it and look forward to the new CD.

Why Low Capacitance? 1. The higher the capacitance of a cable, the less highs reach the amplifier. 2. High-capacitance cables shift the resonance towards the lower frequencies which dramatically alters tone. For example, Jimi Hendrix used a coiled cord with 3,000 picofarads (.003 microfarads), shif...

I like Bill Lawrence cables. Many don't like skinny cables, but I like 'em. Made in the good 'ol US of A. George L's made in???

[img:799:598]http://img.photobucket.com/albums/v521/ ... C02219.jpg[/img]

Welcome marranbarran! I have a Class 5 that I installed a VVR in. You can also use the headphone trick to attenuate the output. http://www.marshallvintagemodern.com/viewtopic.php?f=31&t=3794 Here's my C5... [img:1024:768]http://img.photobucket.com/albums/v521/kecline/Amps/class5/P1000067.jpg[/img] [...

stevlech wrote:http://stiftsbogtrykkeriet.dk/~mcs/Scale.html


This might help

That is cool. Thanks!

mcrracer wrote:Love Mcmaster Carr, Order one day got it the next! Every time.

+1

I can't get a chassis or cut to specific size board from Mouser, Digikey, Alllied etc., that's why I buy as much as I can from Ken. I patronize a vendor based on the total value added, not just on price. The Walmart shopper mentality is one of the main reasons why the little guys are ceasing to exi...

I've been using the black (ESD) version of what the OP has. Got it from my previous job (don't know the brand). No problems with it at all - just an occasional cleaning. Tip is teflon too.

Welcome Tom.

You might want to read this http://aikenamps.com/StarGround.html

Zippy wrote:Is JB Weld conductive? Or are you keeping it well away from the pins?

I only put it on the plastic part of the socket.

Why not just use a waveform generator and an amplifier? That's what I do. I set the frequency to a low setting so I get cone movement (maybe an 1/8" or so for a 12"). You get very little noise (if any at all), depending where you set the frequency and waveform pattern. The amp can be anything - I us...

Finally got around to stuffing the board. I'm using the machined sockets (just like the 'Lil Devil) mounted on the board using some epoxy (JB Weld).

Here's some pics...