The Amp Garage

Thank you for the kind words...I generally figure no one is paying attention to what I do. I'm not so sure about using a 6N7 in place of a 6SN7. The 6N7 has a higher plate resistance and twice the gain. I don't believe this is a good thing for a paraphase inverter. My primitive understanding and lim...

This is from a GA-50T not GA-50. There is a big difference. Be certain of which amp. Lower pot is not grounded. Some things are not placed correctly. The 500K instrument pot gets input to wiper from J2-J4. The long wire going down doesn't belong there. Maybe this helps?

It is impossible to know a person's wants and likes without more information. Also, your post demonstrates how differently one individual's idea can be different from another's. You say 50W or less, not too loud. I think 50W is really loud. So, where does that leave us in terms of helping you? I sug...

That price is ridiculous. You can buy a quality kit new for that price. Of course, that's no speaker and no cabinet. Still, buying someone else's problems for that price? You should pass or offer $250.

Ah, thank you. So when they say 7000K primary/4,8 ohm secondary, that's not actually correct, as it's 7000K to 8ohms, and 3500K to 4ohms.... That explains some of the things in Dave's book that weren't clear, like why you might want to plug an 8ohm speaker into the 4ohm secondary when you run a 6V6...

RC-30 free download: https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://www.worldradiohistory.com/BOOKSHELF-ARH/Technology/RCA-Books/RCA-Receiving-Tube-Manual-1975-RC-30.pdf&ved=2ahUKEwj-uo2gm8SFAxVSE1kFHRfvAKQQFnoECBkQAQ&usg=AOvVaw06CiaA1VtQZwzt6GfDD5AD Not as nice as having ...

You didn't say what you'd like to see for plate voltage on the 6K6's. Instead of the 325-0-325 PT, I might go down to 275-0-275. I didn't do any calculations, so this is a SWAG. There isn't that much difference between 6V6 and 6K6. Aside from the choice of PT, I'd probably build it as shown.

Max,
Even if that were so, you are probably invisible. I know I am.
Phil

I'm reasonably sure most of us have a story like that. My rule of thumb on eBay is don't spend more than you are willing to lose. I keep my expectations low. I'm generally well rewarded. I had one incident where "my package" was delivered (supposedly) in San Francisco. I live in Baltimore. Details n...

T-nuts have their place. In general, I'm not particularly fond of using them. In harder woods, I find the spikes bend over too easily rather than driving into the wood. They are fine for pine and plywood. I've grown to prefer threaded inserts over T-nuts. In any case, without a compelling reason or ...

What is the objection to a through hole so you can use a washer and nut on the inside? That will be sure to hold the weight. If the screws are too long, they can be sawed off. This is simplest, least expensive, and sure to work as desired.

Haven't done it yet but plan to soon. I'll drill then use an old tip on my soldering iron, then keep the (probably ruined) tip for future plastic melting tasks. If I miss any holes I'll melt one with the soldering iron prior to drilling. You may be overthinking this. I'd just puncture the vinyl to ...

Use zip cord (lamp cord.) No need to twist.

mike-p wrote: ↑Tue Feb 13, 2024 7:53 pm Tried to pm you but its stuck in my outbox?

For better or worse, it remains stuck until the recipient reads it. <shrug>