The Amp Garage

You may check the larger series like the 400

Oh, and Joe Bonamassa uses them too in oversized split cabinets

You could check Gary Moore with his legendary tone he menaged to pull from his Marshall JTM45 Reissue, first used on Still Got the Blues album with Marshall 1960B 4 x12″ cabinets fitted with Electrovoice 12M speakers instead of the usual Celestions

Hello, I am more a lurker then a specialist, you can see it on the number of posts. I only know that my digital device won't messure this small values correct. So for me, I had messure the voltage with a known bigger resitor,say 25 or 50 ohm which my device messueres correctly, in series and a fixed...

Oh,

The link works best without the comma........

No thanks Roberto, I am just sharing my knowledge as you all do on this great forum. Because of the reflection of the laser beam when using pure aluminium, for instance Al99.9, you have to use some kind of alloy. The most recommended and used for laser cutting in Holland/Europe is AlMg3 or 5754. It ...

Hi Roberto, I know you are from Europe, as I am from Holland. I am the manager of a small sheet metal company in Holland. We have a laser cutting machine which I occasionally operate. I can tell you , in Europe for laser cutting most common and available Aluminium is AlMg3 or 5754. It is available a...

Please one for me too

Thanks in advance

veurm004@wxs.nl

The twin is an 100 watter, so sure, the 100 watt I am after. In all the files I have read so far this tonemaster PT shows up now and than, but nobody can answer for sure. I also know how much the draw is for the filament, but stranger things have happened in amp building. Only question nobody seems ...

Hello all, I have been reading here over and over again, but I am still not sure if we can use the Tonemaster 026554 PT, I think it is also used in the red knob twin. I have an export version I can rebuild to 102 or 183, because I am from europe. Can some one say for sure it is save to use with EL34...

It is difficult for us to give any advice if you start with a modified baseline of a super reverb without the normal channel, so my advice is, go back to your baseline and correct the mistakes in your schematic. If you are still not happy with the result, the guys over here can give pointers in what...

Hi folks,

I'm new to reply but have visited this site allmost every day last year.

I've used the TS-KT66 in my Mesa Mark 1 reisue without problems, bought them from TAD in Germany, btw I'm from Holland. Currently using EH-6CA7 now.

André