The Amp Garage

I want to build a MS clone.Does anyone have a layout.I have build a champ and rebuilt my 66 AMPEG REVERB ROCKET.

The rectifier board? Thanks

Ive got a good PT and OT from a 66 ampeg reverbrocket gs-12R.I would like to build a fender deluxe.the pt had a 3 amp fuse and used silcon diodes.Iman electronics tech by trade but am new to guitar amps.Thanks

682-539 on both pt and ot.

Ive got a power transformer and a output transformer from a reverbrocket GS_12R.Its about 30 watts and i wired it to use 6V6s instead of 7591s.Imcurious to know who built the trannys. I dont think there hammonds.THANKS.

IM rebuilding a 67 reverbrocket 2 and i want to replace the ss bridge rectifier circuit.Can i use 4 1n4007 1 amp diodes?the diodes in there are black bullet looking things with red and yellow dots.thanks mike

btt

Ive got a lot of old Ampeg parts trannys,tubes etc.I was thinking of building a fender fe-5 deluxe ,using the deluxe preamp and pi and the ampeg rr2 30 watt power amp using 7591s.I would adjust the tonestack accordingly.

Ive got a ampeg rr2 from 66 the pt and ot will work in a fender 5e3 circuit that im gonna build from spare parts.the power tubes are 6v6s and the worked well with this tranny.iIm just trying to figure out what ss bridge rectifier i shuold use . the amp ps uses a 3 amp fuse.I mthinking of using a 8am...

Are they high gain amps like Marshall.Do they have a lot of clean headroom? Thanks

and an ampeg ot that was culled from a ampeg reverrock circa 1965.this amp ran 6v6s and i want to build some kind if twreck amp with.any ideas.I can read schematics and solder thanks

Whatis the best choice for aTW clone chassis ,steel SS or aluminum?. Thanks Mike

Other than the fact that steel is magnetic and alum and stainless isnt what would be preffered for the chassis for the tw rocket build . Thanks Mike

in it.It sounds fine. i did a 6v6 mod to it a couple of years ago. Where can i find a schematic of a TW express? Thanks Mike

Hi My names is Mike im new to the site but am an accomplished electronics tech . I work as an ET of a govt agency. Im new to guitar playin and wouldnt new good tone from bad but im learning and listening. I currently play thru a 66 Ampeg Reverbrocket.I fixed the reverb but wanna use the amp for part...