The Amp Garage

thanks RJ,

That what I want to know

will post a progress soon.

Plein.

Here's my take on it, looking at this schematic : http://ampgarage.com/forum/files/taylor_rocket_schematic_updated_6_5_08_758.pdf C2 : outer foil goes to the plate of the tube. Even though the other end goes to ground through the 500K pot, there will always be 500K resistance from the top of the po...

MArk!!! Thank a lot for your time of drawing! It will be really help. Smokebreak!!! many thank for your try to help too. My confusing go to something like c2. one leg go toward b+5 and other go to ground via Volume. please educate me what I misunderstand. something like c9 as in aiken theory should ...

Here's a good article courtesy of Randall Aiken on the subject : http://www.aikenamps.com/index.php/where-to-connect-the-outside-foil-on-capacitors Hi Smokebreak! Thank for your help!I read that article.Understand the concept. I try to read rocket schemetic but also very confuse (ex.some cap went t...

Hello!Everybody.
I'm going to build one from RJ kits.

If anyone have correct outer foil direction pics of Rocket would be very nice before start building it.

Hope you can help.

Thanks

Plein.

I just cancelled the order from Triode too. I made a payment at 12april.Product status mark as shipped about a week or two weeks ago. But no tracking no. Sent. I just check it again today and they told it may send on Wednesday. They told they sincerely sorry but offer nothing.I do accept their apolo...

TUBEDUDE wrote:Great job! Pics?

Hi! I just made it for fun,just some link on youtube.

here it is.

https://www.youtube.com/watch?v=m_pEeqbrj5Y

thanks

plein.

TUBEDUDE wrote:Yah, numbah waan!

Nice to hear that!!!

actually!

1= Strat I made it myself.
2= D' Pergo strat.

Thanks for all comment.

Plein.

allclear7 wrote:# 1, like the brightness, do they have new strings or old

Hello,
They both not bad condition string but not very new.
1 look older andhave oxide.

Thanks

Plein.

Teleguy61 wrote:Number 1 also.
2 sounds good, but 1 has the presence to really bring out the articulation.

Hello!

Both of them are over standard guitar for sure!!! That why I feel so wonder and ask you all.

Thanks!!!!!

Jana wrote:Number 1.

Nice!to hear that!!!!!!

Hello everybody!! Wonder about this(as the topics). Please stop/listen/and share your own opinion. To be easier just separate both of them to no.1 and no.2. https://soundcloud.com/plysters-wairoon/which-one-do-you-like Both plug in to 68 silverface bass man(that may have to be service very soon) Tha...

cbass wrote:Use the speaker taps as 2/4/8 ohm Instead of 4/8/16 ohm

Hello!

Got it and thank you all!!!

Plein.

But just find some from triode that only have 70/120w with 4300ohm. That mean no dynaco transformer suite for 100watt made,right? Plein. You know individual taste is all subjective anyway; you could use the Dynaco clone 60/120W OT at 2/4/8 @ around 2.1K, instead of 4/8/16@ 4300. TM Tm, How to use i...

Personally, I would choose another transformer over the Dynaco, sticking to the BM baseline of EL34's and Plexi output iron. However, like CW said though, you could build a 2 output tube model. TM TM, Thanks for that too.Actually I use ceriatone bluesmaster kits with plan to modd it.I start the pla...