The Amp Garage

Thanks again Steve

Franco

.... The schematic is not imho showing the jfet correctly .... I agree with you, the simbol that was used is the simbol of an SCR Diode As I'm not confident with Jfet and other Solid State components, if someone can put on the actual schematic where are placed the Source - Drain - Gate connections ...

Franco

p.s.:I aplogize, when I posted I linked a wrong version of the file, now it is correct

Ciao GAStan

May be you are interested on this
Franco

I decided to revise my 2W and 3W (Metal Film) Power Resistor Stencil using bot Color Bands and Numeric Values on each resistor



If you are interested here attached you can find the .vss Stencil file


Franco

To give a look to your old TU

Franco

I just verified with some friends, they know Piemme Elektra and are very satisfied also for this brand

Franco

I haven't direct experience with InMadOut but I've read lot of times good feedbak about those transformers

Franco

There Is no problem

K

.... I think a traditional fixed resistor. Why switched? I mean that the pots on the schematic, that are swapped using a switch, are acting, one at a time, as grid leak resistor ... You mentioned 6Av6 before power tube. Is there a reason for choosing this over a 12AX7 or AT7 or AY7. I told 6AV6 bec...

Switched pots used as grid leak resistor ?

Franco

I'm quikly reading that thread and I've find something that is not favourable to me https://ampgarage.com/forum/viewtopic.php?p=120509#p120509 That preamp has not enough swing for a tube as 5881 and so I think the same for the GU50 or 1625 tubes EL84 is in the order of 11.3mA/V, 1625 is around 6mA/V...

Ciao Martin

Seems that something is at page 5

a Mini HRM Schem & Layout from 10thnx (I think he is Tubenit)





Thanks

Franco

Ciao Guy77 https://ampgarage.com/forum/viewtopic.php?t=10913&postdays=0&postorder=asc&highlight=hrm&start=0 .... Page 2 has a layout you can use Unfortunately on that page I can see only a Schematic https://ampgarage.com/forum/download/file.php?id=11726&mode=view and a link to a pdf containing one ...

Thanks Guy77

Is there a version of Layout I can use

I'm interested also if it is only about the preamp or a whole amp Layout from which I can borrow the preamp layout

---

Ooops ... Sorry Reeltarded


K