The Amp Garage

Don't own, but have heard good first hand reviews. Budget Adams Audio nearfields with ribbon tweeter (if that's your thing). Been intending to audition a pair, about $500 delivered in states.

https://www.adam-audio.com/en/t-series/t7v/

Dave

This worked well for me in a 2-12 cab. It's only $15.95 at AES.

Dave
https://ampgarhttps://ampgarage.com/for ... w&id=53781

Mark, do the diodes change the feel of the power supply?

D

Three years ago, at Christmas my brother gave me a guitar that was made the year I was born. Now I've got a twin. Thing sounds amazing with a dirt box and slide.

Never had an EV, but hard to imagine anything louder than the E120. Bought the E120 new in 1976 and it still sounds terrific. It doesn't really distort, but it gets mid-range feedback in a totally unique way. Way too heavy to carry around anymore. Polarity usually needs to be reversed when pairing w...

Thanks for the input. Think I will let it ride for a while and use the MASS to appease the neighbors.

D

Thanks guys. Yes, it is based on a 2204. It's all preamp with this master and it does sound best opened up into the PI. Running it through a 100 watt MASS right now, trying to decide if I want to add a PPIMV. Do you guys think this would benefit with a second master?

Correction ...100K in parallel with 470k....

That's the low input switch I borrowed from Jana. Puts a 100k in series with the 470K on V2a (before CF), grid to ground. Two distinct gain options through one jack. Very versatile.

I think David Allen ships his amps with EH.

Been almost 40 years since I owned one of these. I forgot how loud they are! Had most of the parts accumulating over the years and after the Marshall section was added to the forum, and reading all the impressive ideas here, managed to assemble another working amp. In the spirit of keep it simple, a...

The Mojo cabs are not bad for the money are they? You going to build two?

D

I built one of those for my nephew's graduation gift. That circuit is very aggressive. Had to lower 470K voltage divider after first stage to dump some gain. Screaming Marshall tone and not much clean.

There is no doubt it was the sharpest box in the alley!

Bob, on my last Rocket, I decided to pay attention to RA and grounded the HT CT, mains and screen filters and power tube cathodes to the first star. I would have grounded the filament CT there as well but I like the resisters to ground better. It is the quietest Rocket I have built. I hate hum.