The Amp Garage

ijedouglas wrote: ↑Fri Mar 29, 2024 3:04 am and the silver mica snubbers on V1b and V2 to ceramic.

Definitely this

I recall reading another account where the observer was struck by HAD's meticulous checking of the resistance of his solder connections. This has come up a few times, can someone explain how one could measure a solder connection? I never understood this one nor have I read it in any past manuals as...

I recall reading another account where the observer was struck by HAD's meticulous checking of the resistance of his solder connections. This has come up a few times, can someone explain how one could measure a solder connection? I never understood this one nor have I read it in any past manuals as...

I recall reading another account where the observer was struck by HAD's meticulous checking of the resistance of his solder connections. This has come up a few times, can someone explain how one could measure a solder connection? I never understood this one nor have I read it in any past manuals as...

talbany wrote: ↑Sat Feb 26, 2022 1:30 pm Peter Lerche's Bluesmaster
6L6 tubes. Serial no 0153. No skyliner delivered 91/92
Speaker Cab/ Eminence Texas Heat 12" speaker in a semi-open cabinet





Tony

I really like Peter Lerche's tone's in this video. What tone stack is this?

More than likely rebrands the originals were made in Japan.. I have seen a few NOS floating around but never the right values :roll: I personally do not care if they are Axials or radials? I'll take em! Think they are worth $945 a piece? https://www.ebay.com/itm/324179476691?chn=ps&mkevt=1&mkcid=28...

Does anyone know how close these would be to the NTE that used to be available at Radio Shack? They are MF flameproof.

Awesome cab set Taylor

Dumble abuse ...would of liked to hear the bridge pickup clean

Well, guess we'll see soon enough. Tony and Ian thanks for listing your experiences with other resistors and what you heard diff between ratings. The ability to fine-tune through component selection was new to me a year or so ago, but I'm having a fun experience with it so far. I'm starting to feel ...

Just got ahold of some Roderstein MK8 (2watt) for plate and cathode values for a 102 build. I had found someone with some MK3's (.5 watt) but they haven't been in contact for a while now. What do you guys think, will there be any difference in how the MK8 sound instead of the MK3? Should sound the s...

When I was messing around with them I found that its critical to measure and make sure they are at least 500pf. Lower and you start to lose the sing. If a higher value produces better sing, I wonder what would be the highest value that could be substituted without it being too big of a departure fr...

Would you be able to give info on the power supply boards you are talking about? I am building an all pc board (except tube) dumblator that was originally going into a 124 based amp. After reading the issues others have had with an in the amp application, I've decided to house it in a separate box ...

Jubal, that turned out great, nicely done! I thought the same re using 12V input and powering the filaments directly; fewer parts and less heat. For anyone who might want to play with this concept, there are some pre-built boards available that can supply ~300V from 12 (basically the same SMPS circ...

Hey Ian Right now all 3 amps have the deep switch config. Not a big fan of the Mid boost.. This is what I generally try to stick to,depending on parts available at the time I have X5F 330's on the board as treble caps (390's are tough to find) and 250's on the bright..471 (mica)for bypass on V1B/22...