The Amp Garage

Hi Bernaduur, do you like the sound of the amp? If you change to fixed bias you'll probably get 2-4 Watts extra at the expense of loosing the original sound. Change electrolytical capacitors and check some speakers. To keep the weight low - it's only 10kg (!) - you could try high efficiency neodyms....

OK, Schmidi, here you go:
http://ampgarage.com/forum/viewtopic.ph ... =signature

I know it is hard to find. I did not post the link in tt-forum...

Ciao
Martin

Wow! I like the upright toroidal

1650G has only 5k primary iirc?

Congrats on the fine build!

Ciao
Martin

Klasse, Rimy!

Ciao
Martin

Hi! Try it for yourself and your rig&playing style. I prefer 50s wiring w. low output humbuckers and no treble cap on volume pot for now. But my guitars are kinda bright and so are my speakers. There is a thread w. some valuable input from Glen Kuykendall and some others a while ago. http://ampgarag...

Hi! I've build a 15 W Liverpool (EL84) and like the TT 7025 for V1 a lot. It's a matter of taste though. 5751 might be an option if your not to much into gainy amps. V1 is most important: check for sound, noise floor/microfonic rattles aso. I did check several types for V2/3 but currently use JJECC8...

Hi!

see
http://ampgarage.com/forum/viewtopic.ph ... ngle+ended

didn't try it, look closer at Brandons idea of modifying the Allen Class Act.

Ciao
Martin

double post due to connection failure...
sorry!
Martin

Hi there! Some interesting ideas. I just happen to be on the verge of a new amp with a similar concept. Thought about a 2xEl84 pp circuit w. fixed bias and some special feedback loop. Preamp might be Dumble inspired. There should be two different feedback configurations: 1. 2 gain stages ->PI ->El84...

Man, she's pretty...that'll fit that ol' blue suede shoes...

Ciao
Martin

Pretty baby, Harry!

Especially like the mahogany and the RED chassis. Did you simply butt joint the boards?

Transformers are looking fat for a <15 W amp. More like 50 W.

Schoen!

Ciao
Martin

Great!

Ok, another amp to build

Ciao
Martin

Hi sidehatch! I'd reduce the cathode caps. Try 10 uF or 5 uF. Up the cathode resistors a bit. Try 1k8. Use slightly different values for first and second gain stage. Sometimes a cut control in the power amplifier section is nice. Reducing values of coupling caps after stages is also an option. Inser...

Congrats, Dana!

Can't wait to hear some sounds

Ciao
Martin

Wayne, it takes an equally warped tube mind to think of that.

While dabbling w. my Lil'Wreck I thought a second about it...why not try? Nothing to lose.

Ciao
Martin