The Amp Garage

My home made 18watt plexi is a Ceriatone design. I used a Hammond L100 series organ chassis and iron for the build . Sounds really good I had the Bassman outside yesterday afternoon and I had a chance to openip the Bass Channel . The amp really sings now when it cranked . The deep switch is really w...

Mark, i might just have to build another amp:)

The deep switch is very cool. I love it . It does seem to give a little boost to the signal.

It shall be done:)
What do you think of the "accent " switch? Have you ever tried it?

Thanks Mark

Thes soul control is already installed so ill try it out tomorrow and see if i like it. I guess i dont have a 10ka pot to do the deep bass mod so i'll have to wait on that mod until i can order some parts. I guess i can always use more parts.

Keith

I figure I could mod the bass channel to have a little more dirt than the normal channel then I would adjust the mixing resistor to get both channels to be at the same volume level. This is all just fun and games on my end as I don't play in a band . My older brother played guitar and I jam with him...

That helps out allot.

Thanks

What does HRM stand for?

Thanks
Keith

Mark, What's your thought on Dumble amps and there tone? I've only heard them on YouTube and have no personal experience with them. I've built a few amps but most have been Fender amps. I've also built a Carmen Ghia clone, matchless Spitfire , Marshall 18 watt , and an 18watt plexi clone. I mostly u...

Thanks for the heads up on the mod and your experiences . I could install a mid pot on the back side of the chassis. Actually I already have hole from a different experiment that didn't work very well. I'll have to check out the bluesmaster PI and see what it looks like and how it compares to the fe...

I think ill try the Deep mod on my bass channel . I can add it to my existing setup mods and check it out. I should have all of the stuff I need to make it happen.

Here is the schematic for my amp: http://www.webphix.com/schematic%20heaven/www.schematicheaven.com/fenderamps/fender_bassman50.pdf I modded the bass channel using something I had in one of my books (see below). I originally wanted to try a Dumble Mod but couldn't find any good info on how to do it....

I would have to add a Mid pot to use these mods. Hmm any mods not using a Mid pot?

Thanks
Keith

Hello gentlemen, I'm new to the board and wanted to say hello to everyone here and I hope I can be a good addition to this forum. That being said I was wondering if there are any good Dumble mods that can be applied to a Silverface Bassman 50. Thanks Keith [IMG:764:1023]http://i1051.photobucket.com/...