The Amp Garage

Hi , can anyone explain me why the driver Cf in SSS 002 has no coupling cap before 1.5K grid resistor?

sorry for the stupid question!

R.

Dual professional and Twin Pro Tube use the same PT of the Tonemaster ( looks like bias voltage doubler in both amps model).

Fender Pro tube has 8 pre tubes and Tonemaster only 3 , wow...same PT!?!

I think 28V brown-brown is for bias voltage doubler circuit!

...but I would build a #002 SSS

100W !!!

I think I will run with twin reverb iron.

Thanks Smitty

Does the Tonemaster PT handle current enought for SSS circuit? I found one with these characteristic: Thanks Primary: Thermal Fuse: white/white 0V RED 120V GREEN 0V YELLOW 100V VIOLET 110V BLUE 120V BLACK Secondary: 185V@600mA RED 0V GREEN/YELLOW 185V RED 28V@300mA BROWN 0V BROWN 6,3V@8A GREEN 0V GR...

Hi Martin , I haven't a neon bulb to do that test ! I have tested the trafo out the amp with a fuse connected to the prim (sec. open). the fuse blows again! Also I tested the 2 primaries: between black-white 38.11uH 0.544Ohm between brown violet 19,92uH 0.205Ohm I tested also between black and viole...

Hello everyone,

a friend of mine brought me a Ampeg SVT 3 PRO, telling me when He turn on , the fuse blows.
In fact, the fuse blows even with the secondaries disconnected. could be the transformer fault?

Thanks

Thanks all!!

thanks all for the input , I think to go with this:

Hi , I have one socket only in my chassis , I can use a double triode only!

6G16 vibroverb?

Hi , I want buid an amp with Vibrato circuit but I don't know what to use: opto or bias modulating type?.

What you suggest me?

There is a great differences between them?

Thanks

R.

both Vol & MV are grounding to the Bus bar!

no , I changed the 500Pf cap with another one , but it's the same!

I changed the ground point from PS board also , but nothing!