18 watt liverpool pcb build

Express, Liverpool, Rocket, Dirty Little Monster, etc.

Moderators: pompeiisneaks, Colossal

User avatar
RJ Guitars
Posts: 2662
Joined: Tue Nov 14, 2006 3:49 am
Location: Los Alamos, New Mexico
Contact:

Re: 18 watt liverpool pcb build

Post by RJ Guitars »

romberg wrote: Fri Jul 14, 2017 12:00 am Looking at this schematic:

http://ampgarage.com/forum/download/file.php?id=6861

and your pictures I can't seem to find R14 (from the linked schematic above). ....
I have access to the inside of a later Liverpool build and he used the Presence circuit from an Express in that build. My intention was to apply that style of presence to this build... hopefully I've succeeded at that. That "Unverified Draft" message is there until there are enough builds to change it to a "Verified" final build status. This kind of feedback really is a good thing for me. If I have it correct then the Express presence control doesn't use the equivalent resistor like the Liverpool has. Hope that makes sense and lemme know if I'm lost on my understanding of this all... I don't mind being wrong but for sure want to get the documentation correct for the future.
Thanks,
rj
Good, Fast, or Cheap -- Pick two...

http://www.rjguitars.net
http://www.rjaudioresearch.com/
http://diyguitaramps.prophpbb.com/
User avatar
RJ Guitars
Posts: 2662
Joined: Tue Nov 14, 2006 3:49 am
Location: Los Alamos, New Mexico
Contact:

Re: 18 watt liverpool pcb build

Post by RJ Guitars »

romberg wrote: Fri Jul 14, 2017 12:00 am Looking at this schematic:

http://ampgarage.com/forum/download/file.php?id=6861 and your pictures I can't seem to find R14 (from the linked schematic above). ....
I've added the schematic for this build... I did find that I do have two R28 resistors in the schematic so I'll fix that and rev it.
Thanks,
rj
You do not have the required permissions to view the files attached to this post.
Good, Fast, or Cheap -- Pick two...

http://www.rjguitars.net
http://www.rjaudioresearch.com/
http://diyguitaramps.prophpbb.com/
acybnsonick
Posts: 2
Joined: Sun Sep 26, 2010 7:34 pm

Re: 18 watt liverpool pcb build

Post by acybnsonick »

Hello all,

I was the fortunate recipient of this amp. I love it, it roars. I play a strat and it goes everywhere from clean, to crunchy to very overdriven. I'm not a hi-fi guy but I couldn't imagine a better sounding amp, different sounding but not better. It sits next to my Cornell 18/20 plexi happily. Will be taking to practice next week and expect to gig.

Big thanks to Josh for building this for me and RJ for supporting him, I'd very happily deal with either of those again.

I whipped up a cab for it, my first attempt at woodworking so go easy on me. And if you've tried to take a pic of curly maple you know what a pig it is to try and make it look as good as it does in real life.

Image
Image
Image

Cheers, Nick
User avatar
xtian
Posts: 6990
Joined: Mon Apr 19, 2010 8:15 pm
Location: NorCal
Contact:

Re: 18 watt liverpool pcb build

Post by xtian »

Hi, Nick. Can we get a better look at the "CHERRY" valence? How did you do that? Looks nice!
I build and repair tube amps. http://amps.monkeymatic.com
Post Reply