mallory pvc612 (.02/600v) caps and the other caps as well
Moderators: pompeiisneaks, Colossal
mallory pvc612 (.02/600v) caps and the other caps as well
hello there, all the stock (except for 1 set) of the mallory pvc612's, pvc601's and pvc622's are spoken for. i've gotten payment from not quite half the guys yet---hoping to get the rest by the end of the week(you guys outside the usa don't count) so i can wrap this up (esp. the standing in line at the post office). if you haven't already sent payment please go ahead and stick it in the mail or pay via paypal. if someone decides they don't want their stuff let me know and i'll post in the for sale section to give others a chance. thanks a lot for the great response. rh
Re: mallory pvc612 (.02/600v) caps and the other caps as well
Hey RH, could you drop me an email please
Thanks
Greg
Thanks
Greg
Re: mallory pvc612 (.02/600v) caps and the other caps as well
Dear RH
I suppose I should have put my hand up earlier, but will you be getting anymore of these caps in the future?
If so could you let me know how much you charge for these caps?
mark_a_abbott@yahoo.com.au
Thanks for your help.
I suppose I should have put my hand up earlier, but will you be getting anymore of these caps in the future?
If so could you let me know how much you charge for these caps?
mark_a_abbott@yahoo.com.au
Thanks for your help.
Yours Sincerely
Mark Abbott
Mark Abbott
Re: mallory pvc612 (.02/600v) caps and the other caps as well
I'd like to get in on this too if possible. I am trying to gather everything (with a very busy schedule) to start a build. Are you accepting paypal?
Re: mallory pvc612 (.02/600v) caps and the other caps as well
just for someone who might want to know. The Sprague 6PSS20 are the same as the mallory. They are made by the same factory for both mallory and Sprague..
So if you have trouble in getting the Mallory PVC series.. the Sprague 6PS series is the same cap,made exactly the same way. And much easier to find.
Richie
So if you have trouble in getting the Mallory PVC series.. the Sprague 6PS series is the same cap,made exactly the same way. And much easier to find.
Richie
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: mallory pvc612 (.02/600v) caps and the other caps as well
Boy am I glad to hear that!! I have plenty of 6ps caps!! FWIW the 225p caps sound identical to the 6ps.
Owner/Solder Jockey Bludotone Amp Works
Re: mallory pvc612 (.02/600v) caps and the other caps as well
Thanks for the tip Richie. Much appreciated.
Yours Sincerely
Mark Abbott
Mark Abbott
Re: mallory pvc612 (.02/600v) caps and the other caps as well
Hi all, just got my delivery from RHinson, They look great! Exact match for the francesca caps!
Allynmey
BTW HeeBGB's ampfest kicked serious ass!
Chris' TW Liverpool was fantastic. I may have build one of those right after my TW Express of course!
Allynmey
BTW HeeBGB's ampfest kicked serious ass!
Chris' TW Liverpool was fantastic. I may have build one of those right after my TW Express of course!
Re: mallory pvc612 (.02/600v) caps and the other caps as well
hello there, glad you liked the caps----hope everyone finds use for the "extra goodies" i tossed in the deal. i've gotten payment from most everyone (either in hand or in transit) so that's cool as well. everyone's been very cool about taking them so they're all truly gone now----i'll keep my ear to the ground for any other stuff of interest in the future for us twreck forum guys. good luck with your builds. rh
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: mallory pvc612 (.02/600v) caps and the other caps as well
Many thanks for the "Grab bag" of extra goodies as well!! I'm sure I have a use for every single piece!!
Owner/Solder Jockey Bludotone Amp Works
Re: mallory pvc612 (.02/600v) caps and the other caps as well
I just recieved my caps also and Thanks for the extra's rh !!
Re: mallory pvc612 (.02/600v) caps and the other caps as well
RH
Got mine today and just wanted to say thanks. Just what I needed to finish my board....
You da man!!
Got mine today and just wanted to say thanks. Just what I needed to finish my board....
You da man!!
Re: mallory pvc612 (.02/600v) caps and the other caps as well
Got my stuff yesterday. Thanks a lot! Looking forward to building with these. RH is a great guy to deal with.