Project started

[Legin]

I am following version A1b and Richies fixed layout is this OK?

[UR12]

I am following version A1b and Richies fixed layout is this OK?

Fixed Layout? What was fixed?

The only mistakes that I have found with A1b is the 470k bleeder resistor in the PS should be 2 x 100k 2w resistors in series and the bright switch shows a 10pf cap while other schematics shows a 100pf cap.

[Legin]

Sorry, that was the name of the file they seem to compare pretty closely.
Nigel

[Allynmey]

Dana and all, that was the layout by Nik based on Kelly '90 and A1B and of course, Francesca. Richie changed a couple of values in Nik's layouts back to original. Nik doesn't have access to some of the values we do so he substituted. Richies layout fixes therefore are based on the original schematics. Sorry for the confusion. Just to be clear, A1B is almost exactly like Kelly '90. Kelly '90 is a match for Francesca. I use Kelly '90 and the Francesca pics for my build.

Allynmey

[Jeph]

Is the layout in the files section? If so, I really need to see an eye doctor (or not stay up 'till 1:30am soldering!)

[Allynmey]

Is the layout in the files section? If so, I really need to see an eye doctor (or not stay up 'till 1:30am soldering!)

You've got mail!

Allynmey

[Jeph]

Thanks man, I'm waitin for it!

[Legin]

Started on the boards this W/E, my main build I am doing with Mallory 150s and I was going to do a parallel project with Sprague ODs however I found some Mojo in my parts box
http://kirkby.com.au/g2/main.php?g2_vie ... itemId=530
Nigel

[Legin]

Trannies have arrived and the giant 25W 1K resistors, everything is go for launch, now I have to find some time

[Legin]

Project latest, just hook up to be done tomorrow, I'm getting excited
http://www.kirkby.com.au/g2/main.php?g2 ... itemId=546
Nigel