Project started
Moderators: pompeiisneaks, Colossal
Project started
I am following version A1b and Richies fixed layout is this OK?
Re: Project started
Fixed Layout? What was fixed?Legin wrote:I am following version A1b and Richies fixed layout is this OK?
The only mistakes that I have found with A1b is the 470k bleeder resistor in the PS should be 2 x 100k 2w resistors in series and the bright switch shows a 10pf cap while other schematics shows a 100pf cap.
Re: Project started
Sorry, that was the name of the file they seem to compare pretty closely.
Nigel
Nigel
Re: Project started
Dana and all, that was the layout by Nik based on Kelly '90 and A1B and of course, Francesca. Richie changed a couple of values in Nik's layouts back to original. Nik doesn't have access to some of the values we do so he substituted. Richies layout fixes therefore are based on the original schematics. Sorry for the confusion. Just to be clear, A1B is almost exactly like Kelly '90. Kelly '90 is a match for Francesca. I use Kelly '90 and the Francesca pics for my build.
Allynmey
Allynmey
Re: Project started
Is the layout in the files section? If so, I really need to see an eye doctor (or not stay up 'till 1:30am soldering!)
Re: Project started
You've got mail!Jeph wrote:Is the layout in the files section? If so, I really need to see an eye doctor (or not stay up 'till 1:30am soldering!)
Allynmey
Re: Project started
Thanks man, I'm waitin for it!
Re: Project started
Started on the boards this W/E, my main build I am doing with Mallory 150s and I was going to do a parallel project with Sprague ODs however I found some Mojo in my parts box
http://kirkby.com.au/g2/main.php?g2_vie ... itemId=530
Nigel
http://kirkby.com.au/g2/main.php?g2_vie ... itemId=530
Nigel
Re: Project started
Trannies have arrived and the giant 25W 1K resistors, everything is go for launch, now I have to find some time
Re: Project started
Project latest, just hook up to be done tomorrow, I'm getting excited
http://www.kirkby.com.au/g2/main.php?g2 ... itemId=546
Nigel
http://www.kirkby.com.au/g2/main.php?g2 ... itemId=546
Nigel