Anyone done a BOM sheet for the express yet?
I know it might be hard to do,as for part numbers etc..but at least maybe just values and what is used.
Richie
BOM sheet [build of materials]
Moderators: pompeiisneaks, Colossal
Re: BOM sheet [build of materials]
If you are interested, I have made one in Excel. It is based on Kelly but I have added some lines indicating possible options ( think Trainflex ). I have also used different parts in some case like Mallory 150 caps.
It is certainly less work than starting from scratch.
It is certainly less work than starting from scratch.
- hot_tube_tone
- Posts: 38
- Joined: Mon Feb 27, 2006 7:09 pm
- Location: Bowling Green, KY
- Contact:
Re: BOM sheet [build of materials]
Richie,
This is not a complete BOM, but it is getting close. All of the part numbers are from Mouser and the page number is in reference to thier catalog. I am not sure that the bias pot will work, and I have ordered a couple of extra parts. You will also need transformers, a chassis, turret board, and a cabinet.
Thanks,
Anthony
This is not a complete BOM, but it is getting close. All of the part numbers are from Mouser and the page number is in reference to thier catalog. I am not sure that the bias pot will work, and I have ordered a couple of extra parts. You will also need transformers, a chassis, turret board, and a cabinet.
Thanks,
Anthony
You do not have the required permissions to view the files attached to this post.
Last edited by hot_tube_tone on Tue Mar 21, 2006 1:11 am, edited 1 time in total.
Re: BOM sheet [build of materials]
Northeastern ky.. Ashland..
I have all the parts except the transformer,which i am having made,a bit different than the others that are used for this amp.
I was just wondering on the parts list [BOM] as to help others find what they need.
Richie
I have all the parts except the transformer,which i am having made,a bit different than the others that are used for this amp.
I was just wondering on the parts list [BOM] as to help others find what they need.
Richie
Re: BOM sheet [build of materials]
Anthony, on your BOM I notice you have ordered a 47K Linear pot for the presence control, my schematic says 4K7 or 5K Linear.
Nigel
Nigel
- hot_tube_tone
- Posts: 38
- Joined: Mon Feb 27, 2006 7:09 pm
- Location: Bowling Green, KY
- Contact:
Re: BOM sheet [build of materials]
Thanks Nigel my layout also calls for a 4K7 pot. I have updated the list. Also were did you source your bias pot? What would the voltage and wattage ratings need to be?Legin wrote:Anthony, on your BOM I notice you have ordered a 47K Linear pot for the presence control, my schematic says 4K7 or 5K Linear.
Nigel
Re: BOM sheet [build of materials]
Interesting you ask that, I have been doing some thinking on that and I would like access to the bias pot without taking out the chassis from the case. I would like to be able to mark bias positions for 6V6 and EL34 amps and do quick tube swaps. At the moment I have ordered some 20K Lin trimpots.