2w Sub Miniature Express

Express, Liverpool, Rocket, Dirty Little Monster, etc.

Moderators: pompeiisneaks, Colossal

Post Reply
ShoreGuy
Posts: 2
Joined: Fri Jan 26, 2007 4:55 pm
Location: NJ

Re: 2w Sub Miniature Express

Post by ShoreGuy »

Hello - Is there any possibility of Lil' Devil PCBs being reordered or remade? Thanks. Best Regards
User avatar
UR12
Posts: 1570
Joined: Mon Nov 28, 2005 7:22 pm

Re: 2w Sub Miniature Express

Post by UR12 »

Not at this time
User avatar
sst4270
Posts: 259
Joined: Mon Jan 08, 2007 8:28 pm
Location: Glen Burnie, MD

Re: 2w Sub Miniature Express

Post by sst4270 »

@shoreguy: I'm pretty sure I have a board and tubes for a lil devil build that I never started. I'll check and post photos if you're interested.

Sent from my Pixel using Tapatalk

User avatar
sst4270
Posts: 259
Joined: Mon Jan 08, 2007 8:28 pm
Location: Glen Burnie, MD

Re: 2w Sub Miniature Express

Post by sst4270 »

sst4270 wrote:@shoreguy: I'm pretty sure I have a board and tubes for a lil devil build that I never started. I'll check and post photos if you're interested.

Sent from my Pixel using Tapatalk
Any interest? Make me a fair offer...ImageImageImageImageImageImage

Sent from my Pixel using Tapatalk

dayn
Posts: 188
Joined: Mon Mar 05, 2007 8:45 pm
Location: seattle, wa

Re: 2w Sub Miniature Express

Post by dayn »

sst4270 wrote: Tue Jan 30, 2018 12:07 am @shoreguy: I'm pretty sure I have a board and tubes for a lil devil build that I never started. I'll check and post photos if you're interested.

Sent from my Pixel using Tapatalk
Any chance you still have this kit?

Or anyone else have one laying around?

I had one of the first Lil Devil's back when Dana made them, great little amp, and I'd love to build one if I can find a kit. Would just buy a completed head.
User avatar
RJ Guitars
Posts: 2662
Joined: Tue Nov 14, 2006 3:49 am
Location: Los Alamos, New Mexico
Contact:

Re: 2w Sub Miniature Express

Post by RJ Guitars »

At one point I designed a PCB board for a 2W Express, but I never pursued or published the effort because it seemed it would tangle things up between Dana and I. My design used the same general idea as my Pocket Rocket build: http://ampgarage.com/forum/viewtopic.ph ... highlight=

I still have a ton of the little tubes and a bunch of chassis that have sat here far too long. If someone wanted to be champion of an effort to bring it all together I could make some parts available. I don't have time nor desire to put together complete packages but if somebody else has the inclination I would share my board designs with them and supply the parts that I have on hand.
Good, Fast, or Cheap -- Pick two...

http://www.rjguitars.net
http://www.rjaudioresearch.com/
http://diyguitaramps.prophpbb.com/
Post Reply