Vox berkeley super twin reverb head
Moderators: pompeiisneaks, Colossal
Vox berkeley super twin reverb head
While cleaning the pots a wire broke loose and I'm not sure where it goes. There are two black wires coming from what I believe to be the power transformer. In the pic I have the wire in question circled and the other with an arrow pointing at it. I think it attaches to the back of the on/off/standby switch. Any help would be greatly appreciated.
You do not have the required permissions to view the files attached to this post.
-
dcribbs1412
- Posts: 1377
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
Re: Vox berkeley super twin reverb head
Hi gmorstadtgmorstadt wrote:While cleaning the pots a wire broke loose and I'm not sure where it goes. There are two black wires coming from what I believe to be the power transformer. In the pic I have the wire in question circled and the other with an arrow pointing at it. I think it attaches to the back of the on/off/standby switch. Any help would be greatly appreciated.
hard to see where the wire originates from
any more pics?
kinda looks like a choke lead.
maybe look close to see if there is a piece of the broken wire still attached?
just some ideas to get started.
-
Reeltarded
- Posts: 9960
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Vox berkeley super twin reverb head
The other end of that wire attaches to my love of bolied fish.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Re: Vox berkeley super twin reverb head
I'll get more pics and post them tomorrow sometime.