Vox AC4C1 chassieless turret build help.

Vox and Hiwatt Discussion

Moderators: pompeiisneaks, Colossal

Post Reply
Purplestrat
Posts: 1
Joined: Tue Feb 25, 2014 8:39 am

Vox AC4C1 chassieless turret build help.

Post by Purplestrat »

I have done tons of modding to my little AC4C1 and I am just tired of the traces lifting. I want to do a turret build but am not sure how to go about it since the tubes are mounted face up on the pcb.

Any one done a build with a chassis like the Vox?
User avatar
sliberty
Posts: 1323
Joined: Fri May 26, 2006 5:03 pm

Re: Vox AC4C1 chassieless turret build help.

Post by sliberty »

Maybe something like this :

https://www.cedist.com/products/P-TB9-2-3
User avatar
M Fowler
Posts: 14017
Joined: Wed Jan 16, 2008 2:19 am
Location: Walcott ND

Re: Vox AC4C1 chassieless turret build help.

Post by M Fowler »

http://ampgarage.com/forum/viewtopic.ph ... t=vox+ac15

I didn't have a chassis only a cab that was given to me so I ordered a custom chassis and built some kind of AC15 into it.
User avatar
LuciMan
Posts: 32
Joined: Tue Jan 15, 2013 2:12 pm
Location: Belgium

Re: Vox AC4C1 chassieless turret build help.

Post by LuciMan »

Hi,

why not using the original AC4 schematic & built a tagboard layout like I did?!
AC3 Twin Top Boost
You could leave the pcb boards - a tagboard is easy to build.

Cheers
Vox (DIY): AC3 TB SuperTwin; AC10; AC15; AC30/4; AC30/6 TB (rear); AC30/6 TB Reverb
Burns: 40th Anniversary Hank Marvin Signature, white / Double Six, redburst
Framus: Strato 5/154-54
Post Reply