Smoothing caps?

[ThreeChordWonder]

Talking about the big dielectric can type ones.

Is there a brand or spec anyone would recommend, at a reasonable cost, as an upgrade to the ones Mojotone supplies?

Will changing them actually make any difference?

The spec as supplied with the kit is:

- 1 x 32/32 uF dual
- 1 x 50/50 uF dual
- 3 x 220 uF single

All 500 volt.

Also, if I can't find 220 uF, would 250 uF be acceptable substitutions? Should I go up.or down on the uFs , or stick strictly to the specified values?

Thanks in advance.

[sluckey]

Mojo sells good stuff. What do you think is inferior with their electrolytics?

[ThreeChordWonder]

Nothing really, just wondered if there are "better".

[sluckey]

Nothing really, just wondered if there are "better".

You can certainly spend more money on filter caps. Are they worth it in a guitar amp? Very subjective.

[pdf64]

Electrolytic caps are wide tolerance type components.
In the old days, the tolerance for higher voltage types was as loose as +100% to -50%.
These days +/-20% is typical
Hence for these purposes, 220 = 250.

[ViperDoc]

Do you need the can type? F&T makes axial caps in all kinds of values, are super reliable, and cheaper than Spragues. 220uF easy. I get mine from Antique Electronic Supply.

[Roe]

what kind of amp is this?

[JD0x0]

The 'better' caps are all radials in place of the overpriced, underperforming axials available.