The Amp Garage

Update...the contractors are taking out my soundproof wall today, so while they're in there I won't be able to take pics of any of the gear till they're done. Email me if you need some pics.

I'm also going to work on putting prices on all of the gear listed as soon as they're done to make it easier to decide if you're interested in a particular piece of gear.

Gotta go move a few last cabs and boxes, they'll be here in 20 minutes.

What an ordeal. The LA County finally inspected and passed all of our corrections to the property, and I can finally uncover all of the gear I'm going to sell, take pics and put prices up.

Five weeks of demolition and construction. Yikes. And it's not quite over yet.

When I get back from the gym, I'll make sure the camera battery is charged, and start taking pics.

I hope none of you ever have to go through this kind of BS, it will drain you.

Jim

Hi Jim,

Glad to hear you are on the downhill side of the debacle. I was playing a J75LD from earlier this year and I just have to have another for a cube version of a 1936 I'm building.

Keep up the great work!

Russ

Geeze, nice looking cab!

While the inspections are over, I'm now back to building speakers and shipping out the stuff that already sold. So hopefully later today (if I'm lucky around more contractor estimates...argh!) I can dust off the blankets/plastic and take pics of the gear.

Of course, that got delayed when Vonage decided to cancel both of my phone #'s by mistake instead of one.

Six hours of tech support to Vonage on my cell...finally got a supervisor to go through the whole thing this morning from 7 am thru 10 am, and 9-12 noon yesterday.

When it rains, it pours.

Gear Sale update. I've made it through the first round of inspections and confirmations with the LA County. Yes, the demolition and inspections were done on May 15th, but it took them over a month to file it in the computer. They wouldn't let me have a building permit for a new patio enclosure until it was uploaded.

Argh!

I've got two more inspections to pass, then I can get plans drawn up (site and elevation plan) for the new enclosed patio. All of my gear is still covered in plastic and moving blankets, but as soon as the patio is built and I can move our personal stuff out of the way of the gear, I'll be posting prices and pics.

Please note that the Koncorde clone is sold, plus the 74 slant cab, and the four pre rola G12M's I had. That paid for the $5500 worth of demolition. As soon as I know what the final costs are for retrofitting our property I'll put more pieces up for sale, including NOS/ANOS glass.

Just a simple reminder, never deal with or trust Home Depot for any contracting work.

Hope you all have a great weekend!

Jim

Been a long haul and it's not over yet. Still waiting on inspections from the LA County Building Permits Dept to proceed with finishing up the property, although the Zoning people have been done for 7 weeks. Geez, they move slow!

I'm going to get some stuff moved, speakers, amps and cabs listed, hopefully tomorrow. What a frigging ordeal...yikes!

Scumback Demo Speakers and Vintage Speakers For Sale

All prices plus shipping costs to your location, and packing costs of $2.50 per speaker

Original Celestion Greenback & Creamback Speakers

Speakers with original cones and date codes
3 Creamback T1281 G12H30 55hz 16 ohm 30w original cone CD8 date code $300 each
2 Greenback T1217 G12H30 75hz 16 ohm 30w original 003 cone $250 (Jan 73) AF22
1 Greenback T1234 G12H30 75hz 8 ohm 003 cone FH3 $250 each
2 Greenback T1460 G12H30 55hz 8 ohm 102 014 cone $300 each (1973/74) AF30/KE23
1 Greenback G12H30 T1862 75hz 8 ohm 003 cone $250 (1971/DD20)
1 Greenback Reissue G12M 16 ohm 25w original cone $75
2 G12H30 Heritage 75 hz 8 ohm 30w $75
1 G12M Heritage 20w 8 ohm $75
2 G12-65 silver frame speakers w/original 1777 cones $150 each



Speakers reconed to Scumback or Celestion specs as noted

2 Greenback G12H30 16 ohm 75hz 6402 cones (Celestion 90's era) $125 each
3 G12M 16 ohm T1221 (1972 EF) -> M75-PVC-16 ohm 65w recones $100 each
2 Greenback T1281 -> Scumback H55-16-65w recones (DD6 & CD8 date codes March/Apr 71) $75 each
1 Scumback M75-16-100w demo (blemished) $75
1 Scumback M55-8-65w demo (blemished) $75
1 G12H30 Heritage 8 ohm 60w Orange County Speaker recone $75
2 G12M 16 ohm 60w Orange County Speaker recone (Greenback 1971 date codes) $100 each
1 BM75-16-65w (silver G12-65 frame) reconed to SSC specs $100
1 G12M T1511 25w 55hz reconed to 55hz 444 cone Celestion / OCSR spec $100

Speakers with Weber Recones
2 Blackback G12H30 16 ohm 16 ohm Weber recones $75 each
1 BlackBack G12H30 T1217 Weber recone 30w $75
3 H55-16-30w Scumbag Weber Prototype $100 each
2 H75-16-30w Scumbag Weber Prototype $100 each
1 H75-8-30w Scumbag Weber Prototype $100
1 M75-16-25w Scumbag Weber Prototype $100
1 Greenback G12H30 T1281 (1971) H55-16 ohm 30w Weber recone $75
1 Greenback G12H30 T1234 (1971) H75-8 ohm 30w Weber recone $75
2 Celestion P44 Alnico (light magnets) Weber recones 8 ohm 30w $125 each
1 Greenback G12H30 T1217 Weber H75 16 ohm 30w recone $75
1 Reinhardt Weber H75 55 hz 16 ohm speaker 30w $75