Woodworking videos worth watching.
Moderators: pompeiisneaks, Colossal
- cbass
- Posts: 4356
- Joined: Sat Jul 23, 2011 6:17 pm
- Location: Between Pomona & Bakersfield
2 others liked this
Woodworking videos worth watching.
This is the only guy I can watch and not get POed and cuss and throw things. He actually knows what he is doing unlike 99% of utube vidyas.
https://youtu.be/NutwD7B6tmE
https://youtu.be/NutwD7B6tmE
Re: Woodworking videos worth watching.
FWIW, I agree and I really like what this guy does. He takes the technical and makes it accessible. Some of his great videos include:
-How to make a cross cut sled and, in the process demonstrates the 5 cut method for insuring that the back fence is square to .001" tolerance. It's EASY to do and you don't need all kinds of expensive stuff to do it.
-How to make a fixture to sharpen your jointer knives, including the so-called disposable ones. On this one, the most interesting part is how he figures out how high to make the block for resting the stone. However, I've seen a jig that does both knives at once that is much simpler to make and you don't have to calculate anything. Oh well, but still a terrific video.
-Many other clever things done well and done simply.
If you need to know how to do it the old school way without the benefit of power tools, watch Paul Sellers. He can make a rough cut board 4-square with a #4 plane and a saw, and he makes a perfect M&T joint with a saw and a chisel.
I wish that I knew 10% of what either of these guys knows. Both of them give very honest, straight forward presentations of material without editorializing or judging what others do or don't. It's refreshing.
-How to make a cross cut sled and, in the process demonstrates the 5 cut method for insuring that the back fence is square to .001" tolerance. It's EASY to do and you don't need all kinds of expensive stuff to do it.
-How to make a fixture to sharpen your jointer knives, including the so-called disposable ones. On this one, the most interesting part is how he figures out how high to make the block for resting the stone. However, I've seen a jig that does both knives at once that is much simpler to make and you don't have to calculate anything. Oh well, but still a terrific video.
-Many other clever things done well and done simply.
If you need to know how to do it the old school way without the benefit of power tools, watch Paul Sellers. He can make a rough cut board 4-square with a #4 plane and a saw, and he makes a perfect M&T joint with a saw and a chisel.
I wish that I knew 10% of what either of these guys knows. Both of them give very honest, straight forward presentations of material without editorializing or judging what others do or don't. It's refreshing.
Re: Woodworking videos worth watching.
hand tools? im already getting angry
Actually i pretty much make jigs and setup tools like Will does. calipers and feelers ive always used the five cut to square thing dad taught me that
Actually i pretty much make jigs and setup tools like Will does. calipers and feelers ive always used the five cut to square thing dad taught me that
Re: Woodworking videos worth watching.
I agree, that guy's really good. No B.S.
Re: Woodworking videos worth watching.
Thanks. I'll check this guy out. I like Stumpy Nubs and John Heisz (his builds, not his rants). Need a better cross cut sled than my original, but I agree that jigs seem to be where it's at. Wish I'd taken that shop class I dropped in High School. I wanted to build a guitar, and they started at with all of this safety crap. I cut class and never went back.
- martin manning
- Posts: 13208
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: Woodworking videos worth watching.
It's a great video on finger joints, thanks cbass! I'll have to see what else he has out there.
Re: Woodworking videos worth watching.
I looked at his knife sharpening thing as more of a thinking exercise . How to approach jig making. I ain't got time to sharpen by hand real men do it like this http://s938.photobucket.com/user/MykRia ... 7.mp4.htmlPhil_S wrote: ↑Sun Jan 20, 2019 11:13 pm FWIW, I agree and I really like what this guy does. He takes the technical and makes it accessible. Some of his great videos include:
-How to make a cross cut sled and, in the process demonstrates the 5 cut method for insuring that the back fence is square to .001" tolerance. It's EASY to do and you don't need all kinds of expensive stuff to do it.
-How to make a fixture to sharpen your jointer knives, including the so-called disposable ones. On this one, the most interesting part is how he figures out how high to make the block for resting the stone. However, I've seen a jig that does both knives at once that is much simpler to make and you don't have to calculate anything. Oh well, but still a terrific video.
-Many other clever things done well and done simply.
If you need to know how to do it the old school way without the benefit of power tools, watch Paul Sellers. He can make a rough cut board 4-square with a #4 plane and a saw, and he makes a perfect M&T joint with a saw and a chisel.
I wish that I knew 10% of what either of these guys knows. Both of them give very honest, straight forward presentations of material without editorializing or judging what others do or don't. It's refreshing.
Re: Woodworking videos worth watching.
I didn't care much for his finish guys videos at all. I know it's just a demonstration but I wasn't impressed by any of his final outcomesmartin manning wrote: ↑Tue Jan 22, 2019 11:34 am It's a great video on finger joints, thanks cbass! I'll have to see what else he has out there.
Re: Woodworking videos worth watching.
NG makes great how to vids - clear and concise. This guy - Samurai Carpenter - is more on the 'art' of what's possible side which I find helpful in expanding my skills. Also dangerous as I forwarded the link to my mom [pop's email was down] and she asked me to build one for her.
https://www.youtube.com/watch?v=IqSafVpWkyc
I'd do videos if I was smarter, not so lazy and didn't spend much of my time fixing the stuff I've screwed up.
Russ
https://www.youtube.com/watch?v=IqSafVpWkyc
I'd do videos if I was smarter, not so lazy and didn't spend much of my time fixing the stuff I've screwed up.
Russ
Re: Woodworking videos worth watching.
Here's William Ng fixing a bad miter on a cabinet corner. It's simple. You'd think the solution was obvious. And you wouldn't expect a guy who seems to be 3 steps ahead of everyone could find himself in such a situation. https://www.youtube.com/watch?v=gyHtW_x8Y64
Ng covers all sorts of important topics. You wouldn't believe this one, a must watch. How to properly chuck a drill bit: https://www.youtube.com/watch?v=vq2YlWf3RYI
Ng covers all sorts of important topics. You wouldn't believe this one, a must watch. How to properly chuck a drill bit: https://www.youtube.com/watch?v=vq2YlWf3RYI
Re: Woodworking videos worth watching.
I learned to smash corners in from Dad also. I'm pretty sure he fudged that joint up just for demonstration.Phil_S wrote: ↑Sun Jan 27, 2019 7:09 pm Here's William Ng fixing a bad miter on a cabinet corner. It's simple. You'd think the solution was obvious. And you wouldn't expect a guy who seems to be 3 steps ahead of everyone could find himself in such a situation. https://www.youtube.com/watch?v=gyHtW_x8Y64
Ng covers all sorts of important topics. You wouldn't believe this one, a must watch. How to properly chuck a drill bit: https://www.youtube.com/watch?v=vq2YlWf3RYI
If you're not chuckng bits like he shows you're doing it wrong
Re: Woodworking videos worth watching.
Samurai guy is ruining it for the rest of us.
Re: Woodworking videos worth watching.
pretty cool stuff. definitely out of my artistic level. i dont have the patience for stuff like that.Geeze wrote: ↑Sun Jan 27, 2019 4:09 pm NG makes great how to vids - clear and concise. This guy - Samurai Carpenter - is more on the 'art' of what's possible side which I find helpful in expanding my skills. Also dangerous as I forwarded the link to my mom [pop's email was down] and she asked me to build one for her.
https://www.youtube.com/watch?v=IqSafVpWkyc
I'd do videos if I was smarter, not so lazy and didn't spend much of my time fixing the stuff I've screwed up.
Russ
Re: Woodworking videos worth watching.
Hard to believe that guy still has two thumbs.