And you had a twin with two swamp thangs,
And a amp nation dumble style 2x12
What type of 2x12 cabinet would you build?
The celestions are 16 ohm. And I would get a different v30 to mix with one.
4x12 cans are just too big and bulky.
I want another 2x12. I could use a marshall type cab to put with a jam I may build.
I'm not set in stone on anything, just looking for ideas.
If you had 2 vintage 30'
Moderators: pompeiisneaks, Colossal
- dragonbat13
- Posts: 321
- Joined: Tue Feb 27, 2007 1:38 am
- Location: Southwest Louisiana
Re: If you had 2 vintage 30'
I was going to suggest a detuned 4x12, but ChopSauce saw to that. Big and airy sounding but a little less weight with two speakers removed. But still bulky. For a 2x12, I would look at the Dumble style 2x12 ported/open back.
Re: If you had 2 vintage 30'
1936, or a staggered 2x12 if you don't like the width of the 1936.
I'd also suggest looking at Zilla's cabs. I built a copy of one of their OS 1x12's and like it better - so far - than TL-806 cabs. I'm not sure you can go wrong. Of course I'm a closed back guy.
Russ
I'd also suggest looking at Zilla's cabs. I built a copy of one of their OS 1x12's and like it better - so far - than TL-806 cabs. I'm not sure you can go wrong. Of course I'm a closed back guy.
Russ
Re: If you had 2 vintage 30'
Bogner Cube/clone
Same as Crate Blue Voodoo 1-12"
V30 is the stock speaker
Same as Crate Blue Voodoo 1-12"
V30 is the stock speaker
There are no stupid questions, just stupid people.......