Cutout depth on Amplified Nation?

[timrobertson100]

Hi folks

I’m building a head cabinet for a Dumble style amp, hopefully to look like the Amplified Nation ones with metal trim.

Does anyone know how deep the cutout is please?

I estimate it’s set back 15mm from the front, maybe cut at 30degrees. I presume the metal trim is 20mm and the chassis mounted 25mm from the very front (10mm back from the cutout)

Thanks to anyone who could comment

[timrobertson100]

Answering here in case anyone stumbles on this.

Found a sketch of one from AN on this thread
https://ampgarage.com/forum/viewtopic.p ... 5f1f6b3016

Mod edit: URL was wrong? removed the invalid hyphen.