Some progress on the inner shell.
I bought a cheap dovetail jig I found at Horror Freight, $34, only to find internal steel guide posts preventing anything over 12" wide from being used.
So it was Skill saw, jigsaw and coping saw to cut the finger joints.
Fine tuning edges with a chisel left a few marks, so I'll rub some dirt on them and walk it off.
Glueup
Inner shell finished.
Alternative cabinet materials
Moderators: pompeiisneaks, Colossal
Re: Alternative cabinet materials
Tube junkie that aspires to become a tri-state bidirectional buss driver.