WGS12L Problem

Discussion of Speakers, Cabinets and Cabinet Building

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
GAStan
Posts: 299
Joined: Thu Feb 23, 2023 9:35 pm
Location: El Paso, Texas

WGS12L Problem

Post by GAStan »

While playing my ODS 183 clone today the speaker went out. Open voice coil.

My 183 build thread:
https://ampgarage.com/forum/viewtopic.php?f=4&t=36762

The main volume was at 12, Clean volume at 2 o'clock, OD off. Tone was a bit of hair but not overdriven. It was loud but not ear ringing or ear plugs required loud. Should this have blown the 200w WGS12L speaker? I'm curious what the collective experience here thinks.

I emailed WGS and they opened a trouble ticket, I'm waiting for a response.
Glenn
User avatar
GAStan
Posts: 299
Joined: Thu Feb 23, 2023 9:35 pm
Location: El Paso, Texas

Re: WGS12L Problem

Post by GAStan »

WGS was quick to respond!

"Thank you for reaching out to us. It seems as though there's some other defect at play with this speaker. I can't see this speaker being overpowered by a 100w amp, much less a 100w amp at half power.

Please use the attached UPS label, and the RMA info below to send your speaker in for replacement."
Glenn
User avatar
cbass
Posts: 4356
Joined: Sat Jul 23, 2011 6:17 pm
Location: Between Pomona & Bakersfield

Re: WGS12L Problem

Post by cbass »

That's cool. Any company can have quality control issues. It's how they respond to those issues that makes an impression on me. Hope it works out good for you.
User avatar
stelligan
Posts: 1444
Joined: Sat Sep 30, 2006 3:58 pm
Location: Nashvull

Re: WGS12L Problem

Post by stelligan »

WGS have been standup folks from the start. Good to hear that it continues. :!:
Post Reply