WTB: Mustard .22uF and .047uF caps

[Reeltarded]

There they are. Taking up your storage space. Worthless!

.22u and .047u 400v-630v prefer axial will take radials. Longish legged pulls or factory short leads are probably ok.

What ya got?

[bepone]

last 2

123.jpg

[Scumback Speakers]

I've got a complete set for a Marshall super lead, but let me check and see if I have any extra .22 and .047s in the box.

[Reeltarded]

If these values are ones you guys like to use you should use them. It's just me buying for a few future builds in original heads to make "what if" hotrods that are confusing.

But I do need these two values and Bianchi markings are also fine.

1000v.. that is a lot of volts. I bet pepole think that is magic lol

[Colossal]

Bump

[Reeltarded]

Faht

[Roe]

got some .47u axial caps - how many do you need

[Reeltarded]

Are they 400v, Roe?

Pairs.. uhh. 4 or 5 pairs would be ideal. More maybe.. if you have more.

I can't believe it's so hard to find .22 axials. I think that is the most ubiquitous value for 400v caps.

Thanks!

[Scumback Speakers]

@Reeltarded found this ad on the Marshall Forum.

https://www.marshallforum.com/threads/m ... ts.132950/

[Reeltarded]

@Reeltarded found this ad on the Marshall Forum.

https://www.marshallforum.com/threads/m ... ts.132950/

thanks for the headsup!

[Roe]

Are they 400v, Roe?

Pairs.. uhh. 4 or 5 pairs would be ideal. More maybe.. if you have more.

I can't believe it's so hard to find .22 axials. I think that is the most ubiquitous value for 400v caps.

Thanks!

they seem to be 160v (or 125v possibly). I do have some .22 and .33 but I will have to check voltage ratings and colour (some are green, not mustard)

[Roe]

I have some .22u 125v

[Colossal]

Bump. Still needed?

[boops]

Hi

I have plenty of 220 nf (0,22uf) 400v, axial.pm me.

[Reeltarded]

No!!

Ok! Right now! Poyekhali!