Aluminum chassis for sale. I had these made locally for my own projects, but I'm not building as actively at the moment. Drilled for IEC, 8- and 9-pin tube sockets, input and output jacks, loop, 8mm pots, and a bunch of miniature switches. Tack welded corners. 12 gauge aluminum (~2mm; .08")
Two sizes available:
Smaller one: 17.5" x 6.5" x 2.5".
Larger one: 20.5" x 6.5" x 2.5". Room for one more 9-pin socket and some additional front-panel switches and pots.
Graphics files available for making your front and rear panels. PCBs also available.
Small: US$60 (5 available)
Large: US$70 (3 available)
(buyer to cover shipping costs)
FS: chassis for your projects
Moderators: pompeiisneaks, Colossal
FS: chassis for your projects
You do not have the required permissions to view the files attached to this post.
Last edited by V2 on Wed Jan 03, 2024 2:13 am, edited 1 time in total.
Re: FS: chassis for your projects
Here's how I've used these chassis...
You do not have the required permissions to view the files attached to this post.
Re: FS: chassis for your projects
What thickness is the aluminum?
I build and repair tube amps. http://amps.monkeymatic.com
Re: FS: chassis for your projects
Building two more amps using my chassis and PCBs...
Only the small chassis is currently available...
Only the small chassis is currently available...
You do not have the required permissions to view the files attached to this post.