Hoyt Axton Dumble pics
Moderators: pompeiisneaks, Colossal
Hoyt Axton Dumble pics
Here are a few pics of the Bonamassa 'Hoyt Axton Dumble"
interesting DI box came with it.
interesting DI box came with it.
You do not have the required permissions to view the files attached to this post.
Re: Hoyt Axton Dumble pics
You would think that Joe could afford a quad of 6L's a little better than the JJ's in his Dumble
Sacrilege.
OK Let the flames begin!.. Bring it.
Tony
Sacrilege.
OK Let the flames begin!.. Bring it.
Tony
" The psychics on my bench is the same as Dumble'"
Re: Hoyt Axton Dumble pics
Careful with that crowbar!
- norburybrook
- Posts: 3290
- Joined: Mon Jan 06, 2014 12:47 am
- Location: London
- Contact:
- norburybrook
- Posts: 3290
- Joined: Mon Jan 06, 2014 12:47 am
- Location: London
- Contact:
Re: Hoyt Axton Dumble pics
I presume they're replacing the Altec with his Celestion JB speaker, basically a re-badged Classic Lead 80. A great speaker I must say. Mind you 100w amp 80w speaker could be trouble. Does it have a 100/50w switch?
edit: yes it does
Interesting he's no longer soldering the coax braids to the back of the pots, he' s now twisting and sleeving and soldering to the bus bar.
M
Re: Hoyt Axton Dumble pics
Robben has always run crappy tubes in 102 . He used to run those god awful Solvtek 5881's at 60 bucks a quad.
Tony
" The psychics on my bench is the same as Dumble'"
Re: Hoyt Axton Dumble pics
In Joe's latest rig rundown, he says both combos had speaker changes to the Celestion JB.norburybrook wrote: ↑Fri Jul 19, 2019 11:58 am I presume they're replacing the Altec with his Celestion JB speaker, basically a re-badged Classic Lead 80. A great speaker I must say.
I was thinking, what on earth is that guy doing with that prybar?!?
Tony, I'm building a guy a 102 right now and have a quad of JJs for it because Robben uses them
Re: Hoyt Axton Dumble pics
Your customer is lucky Robben is no longer running the Solvteks....I guess...Tony, I'm building a guy a 102 right now and have a quad of JJs for it because Robben uses them
One thing I will say about the JJ's is they are a tough ass tube. But can you make them any more Sterile? They remind me more of a lowered powered version of a 6550 or an STR-440 than a "Classic" 6L sound.
Tony
" The psychics on my bench is the same as Dumble'"
Re: Hoyt Axton Dumble pics
Indeed, they are tough! I tried to kill some JJ 6V6Ss running 460V but they wouldn't die. I'll see how those 6L6s sound in this amp and swap them out if they're awful.talbany wrote: ↑Sat Jul 20, 2019 12:09 amYour customer is lucky Robben is no longer running the Solvteks....I guess...Tony, I'm building a guy a 102 right now and have a quad of JJs for it because Robben uses them
One thing I will say about the JJ's is they are a tough ass tube. But can you make them any more Sterile? They remind me more of a lowered powered version of a 6550 or an STR-440 than a "Classic" 6L sound.
Tony
-
- Posts: 822
- Joined: Sun Dec 07, 2008 12:42 pm
- Location: Veracruz, Mexico
1 others liked this
Re: Hoyt Axton Dumble pics
Yes. I remember that amp. I did a recap on it. Those blue Spragues is the serviced I did. The original orange Sprague filter caps had bubbles. I have a file full of the pictures of that amp.
Re: Hoyt Axton Dumble pics
This amp is pretty well documented but more pics are always welcome (Especially the tonestack) and Presence supply.
Thanks
Tony
" The psychics on my bench is the same as Dumble'"
-
- Posts: 1129
- Joined: Thu Jan 23, 2014 7:32 pm
- Location: Laguna Niguel, California
- JazzGuitarGimp
- Posts: 2355
- Joined: Mon Jul 23, 2012 4:54 pm
- Location: Northern CA
Re: Hoyt Axton Dumble pics
I was thinking more like: Hmmmmm.... I wonder what..... CLANK!!!! OOOOOOOOH, he got the prybar too close to the speaker!!!!
Lou Rossi Designs
Printed Circuit Design & Layout,
and Schematic Capture
Printed Circuit Design & Layout,
and Schematic Capture
Re: Hoyt Axton Dumble pics
He had some super old NOS 6L6-JC in. But they where holy shit. That's why he swaped them with JJs..
Cheers
Gerhard