First Amp and Cab
Moderators: pompeiisneaks, Colossal
First Amp and Cab
Finally got done with my first amp and cab that I built. I started off with a Ceriatone kit for the chassis and components. I now have parts for 4-5 more builds completely from scratch using the BOMs on here. The cab was more difficult than I expected, especially getting those corners on just right (which they aren't), even tried a jig. I used Wilson Art H20, I don't think I let it dry long enough but it worked out ok. I learned if the Tolex doesn't stick in some parts, use a heat gun and it will make it stick, I think it reactivates the glue. Overall it was a lot of fun and this is the best sounding amp I have. Getting ready to start my next build with Ryan's boards and chassis!
You do not have the required permissions to view the files attached to this post.
Re: First Amp and Cab
Congratulations. It looks bad ass.
- ijedouglas
- Posts: 718
- Joined: Fri Sep 22, 2017 9:07 pm
- Location: Southern California
Re: First Amp and Cab
Great, well done man!
First cabinets but not first woodwork, does it seem...
Now you're hooked anyway...
First cabinets but not first woodwork, does it seem...
Now you're hooked anyway...
- statorvane
- Posts: 557
- Joined: Thu May 11, 2006 3:28 pm
- Location: Upstate New York
Re: First Amp and Cab
The snakeskin Tolex looks very cool. Nice choice and nicely done.