Question on the Precision power board?
Moderators: pompeiisneaks, Colossal
Question on the Precision power board?
On this Precision power board are we replacing the four laydown 22uf's F+T's with eight standup 47uf 315V or are we adding them to the board???
Thank you, Brian
You do not have the required permissions to view the files attached to this post.
Last edited by Dragon1 on Fri Oct 13, 2023 10:39 pm, edited 1 time in total.
Re: Question on the Precision power board?
Well that didn't work, wanted to insert the pic.
Again thanks, Brian
Again thanks, Brian
Re: Question on the Precision power board?
I believe it's a choice of one or the other. The 47uf is effective ~23.5uf 630v (series capacitance) https://www.khanacademy.org/science/phy ... ors-series
I'm not the most versed in ODS circuits but I believe that's correct. (Team, correct me if I'm wrong here)
I'm not the most versed in ODS circuits but I believe that's correct. (Team, correct me if I'm wrong here)
Ryan
https://www.thetonegeek.com/
https://www.thetonegeek.com/
- martin manning
- Posts: 13356
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: Question on the Precision power board?
The Precision PS replaces each of the 4 axial caps with a pair of radial caps and the necessary balance resistors. Per the notes, you need to add four eyelets to the axial cap board.
Re: Question on the Precision power board?
Thanks for clearing it up .
Brian
Brian