Silkscreening request
Moderators: pompeiisneaks, Colossal
Silkscreening request
I have one of Graydon's early ODS chassis. It doesn't have any silkscreening on it, front or rear. Is any one of you who does these, willing to have mine screened the next time you do a run? Whatever is fair, money-wise. I'm in the US. Thanks.
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Silkscreening request
Sure,
Last edited by Funkalicousgroove on Tue Apr 11, 2006 2:14 pm, edited 1 time in total.
Owner/Solder Jockey Bludotone Amp Works
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Silkscreening request
Sure, I can have it done for you but the min is $150. It takes about 4 days give or take. If you want I can sell you a pre-printed Graydon chassis for $125, I have one left that I won't use. It has a teeny spot on the inside where the grinder got away from me, but once you put boards on it you'd never know. Lemme know and I can get you pics.
Owner/Solder Jockey Bludotone Amp Works
Re: Silkscreening request
Thanks for the offers. My time frame would be fine at 3 to 6 months or more. I was looking to put mine in with a batch someone was already doing, not a one-off. I don't want to push anyone's schedule up, back, or sideways . I have a hybrid-A type thing shoved into my '83 Concert, so I'm not Odious-less.
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Silkscreening request
I'll be doing a run of chassis in July or so, if that works for you.
Owner/Solder Jockey Bludotone Amp Works
Re: Silkscreening request
Sounds great. Please email me jayfbv at yahoo dot com
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Silkscreening request
Just occurred to me that my back pannel reflects later amps with an impedance selector and no 1/2 power switch, so at best I'd only be able to do the front with my others. I can get you the artwork if you want to have your own done, I can sell you a whole chassis already done, or I can have them do your individually for the $150 min.
Owner/Solder Jockey Bludotone Amp Works
Re: Silkscreening request
That's probably not a problem. I was building it with an impedance selector in one of the holes...don't recall which. Are the hole placements different?
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Silkscreening request
unfortunately they are. They have the lam for the chassis you have, but since it's different I know they'll charge me for a new screen. The new chassis don't have the AC outlet either.
Owner/Solder Jockey Bludotone Amp Works