Thanks. I can't believe I did it again.Guitarman18 wrote:Nice looking build leleduke!
BTW, you have the 24K(?) resistor going from the .1uf to the input of the PI and not to the resistor network. I noticed this in a previous build of yours and then it was changed to accept the coax(?) from the power amp in jack.
Cheers, Paul.
D'lite customer build
Moderators: pompeiisneaks, Colossal
Re: D'lite customer build
Re: D'lite customer build
looking good you'll soon be ready for the fun part
Re: D'lite customer build
Where is the treble cap?
Re: D'lite customer build
I have two on the 3 way switch.dogears wrote:Where is the treble cap?
Re: D'lite customer build
I don't see them.... Can you post a fresher pic?
leleduke wrote:I have two on the 3 way switch.dogears wrote:Where is the treble cap?
Re: D'lite customer build
What treble cap are you talking about? The brite caps on the switch???dogears wrote:I don't see them.... Can you post a fresher pic?leleduke wrote:I have two on the 3 way switch.dogears wrote:Where is the treble cap?
Re: D'lite customer build
He means the 390pF in series with the .002uF you have on the board...it looks like it's not connected yet, judging by the red wire that goes nowhere on the rightmost lug of the treble pot.
-
- Posts: 453
- Joined: Tue Sep 04, 2007 9:32 pm
- Location: UK
Re: D'lite customer build
dave g wrote:
Connected via a mid boost switch. Usually where you have your deep switch.He means the 390pF in series with the .002uF
Re: D'lite customer build
Its on the relay board.dogears wrote:Where is the treble cap?
Re: D'lite customer build
Finished.
[IMG766]http://i5.photobucket.com/albums/y167/l ... 0_4064.jpg[/img]
[IMG766]http://i5.photobucket.com/albums/y167/l ... 0_4062.jpg[/img]
[IMG766]http://i5.photobucket.com/albums/y167/l ... 0_4063.jpg[/img]
[IMG766]http://i5.photobucket.com/albums/y167/l ... 0_4064.jpg[/img]
[IMG766]http://i5.photobucket.com/albums/y167/l ... 0_4062.jpg[/img]
[IMG766]http://i5.photobucket.com/albums/y167/l ... 0_4063.jpg[/img]
Re: D'lite customer build
Man, that's some _pretty_ work.
Very jealous.
Very jealous.
Re: D'lite customer build
Thanks, I hope it sounds as good as it looks.DonMoose wrote:Man, that's some _pretty_ work.
Very jealous.
Re: D'lite customer build
congrats!
Looking good!
Looking good!