Octal base-clamps
Moderators: pompeiisneaks, Colossal
Octal base-clamps
...that aren't junk -- anyone have a source?
-
- Posts: 223
- Joined: Fri Mar 06, 2009 1:51 pm
- Location: North Carolina
- Contact:
Re: Octal base-clamps
Belton from AES or CE Dist, well worth the extra buck or so. The standard asian stuff breaks with one tightening.
Re: Octal base-clamps
Are you talking about the bear trap retainers like this?
[img:144:119]http://www.tubesandmore.com/cemirror/inv/S-H142.GIF[/img]
I like these from AES they have teeth on them.
[img:144:119]http://www.tubesandmore.com/cemirror/inv/S-H142.GIF[/img]
I like these from AES they have teeth on them.
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: Octal base-clamps
+1 for the Belton's from AES. Can't fault them...
Re: Octal base-clamps
S-H142 ? The description doesn't say Belton, and others do. The ones I bought from either LV or Hoffman snapped in no time.collinsamps wrote:Belton from AES or CE Dist, well worth the extra buck or so. The standard asian stuff breaks with one tightening.
Re: Octal base-clamps
Yes that's the one:jaysg wrote:S-H142 ? The description doesn't say Belton, and others do. The ones I bought from either LV or Hoffman snapped in no time.collinsamps wrote:Belton from AES or CE Dist, well worth the extra buck or so. The standard asian stuff breaks with one tightening.
http://www.tubesandmore.com/scripts/fox ... tem=S-H142
I've used 100s of these, haven't snapped one yet.
-
- Posts: 223
- Joined: Fri Mar 06, 2009 1:51 pm
- Location: North Carolina
- Contact:
Re: Octal base-clamps
Also they say........
"Please Note: This tube clip will not work with socket P-ST8-500"
But you can trim the inner screw slot tabs with a pair of hefty side cutters and it will work with any octal socket that I've used to date.
"Please Note: This tube clip will not work with socket P-ST8-500"
But you can trim the inner screw slot tabs with a pair of hefty side cutters and it will work with any octal socket that I've used to date.