Regarding the Celestion G-1265 order
Moderators: pompeiisneaks, Colossal
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Regarding the Celestion G-1265 order
they are all in, 1/2 of them have shipped, they will all go out this week!
Owner/Solder Jockey Bludotone Amp Works
Re: Regarding the Celestion G-1265 order
Thanks mucho, Funk. Very nice of you to do this for the group here.Funkalicousgroove wrote:they are all in, 1/2 of them have shipped, they will all go out this week!
-g
Re: Regarding the Celestion G-1265 order
Hey Funk,
Everything received safe and sound.
Once again, thank you very much for putting this all together for us!
Should be receiving my Avatar 112 in a couple of days but, being the impatient one that I am, I will be loading the G1265 into my MB 1X12 cab to see how it sounds.
One quick question: Do these speakers typically require a break in period? All of the Weber alnico type speakers that I have ever bought needed a couple of hours in operation before the little "rubs" were worked out.
Just curious.
Thanks again,
Dave O.
Everything received safe and sound.
Once again, thank you very much for putting this all together for us!
Should be receiving my Avatar 112 in a couple of days but, being the impatient one that I am, I will be loading the G1265 into my MB 1X12 cab to see how it sounds.
One quick question: Do these speakers typically require a break in period? All of the Weber alnico type speakers that I have ever bought needed a couple of hours in operation before the little "rubs" were worked out.
Just curious.
Thanks again,
Dave O.
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Regarding the Celestion G-1265 order
I think they do, I have a pair of 16 ohm's in my cab and I notice a little cone wierdness at certain frequencies around Bb. the classics sometimes do odd things, I just accept it as part of the deal!
ENJOY!!!!
ENJOY!!!!
Owner/Solder Jockey Bludotone Amp Works
Re: Regarding the Celestion G-1265 order
Any chance you have any of these left over still available?
Thanks,
Rut
Thanks,
Rut
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Regarding the Celestion G-1265 order
I have a pair of 16 ohm if you want them, but only as a pair.
I mounted them in a cab, but never soldered the tabs, they have about an hour on them. I like them but I personaly prefer my Emminence.
I mounted them in a cab, but never soldered the tabs, they have about an hour on them. I like them but I personaly prefer my Emminence.
Owner/Solder Jockey Bludotone Amp Works
Re: Regarding the Celestion G-1265 order
Thanks but I'm just building a single speaker cab and prefer an 8 ohm.
Rut
Rut
- skyboltone
- Posts: 2287
- Joined: Wed May 10, 2006 7:02 pm
- Location: Sparks, NV, where nowhere looks like home.
Re: Regarding the Celestion G-1265 order
As long as we're on the subject. I put mine in a open back cabinet for now. What's the grail cabinet like for these?
Dan H
Dan H
The Last of the World's Great Human Beings
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
- Funkalicousgroove
- Posts: 2232
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Regarding the Celestion G-1265 order
Original stock would have been in a JCM800 4x12.
Owner/Solder Jockey Bludotone Amp Works