5/16 Tip Jack Part Number
Moderators: pompeiisneaks, Colossal
5/16 Tip Jack Part Number
What tip jack are you using in the CE chassis for bias test points?
5/16" (.3125") D-shaped hole.
After an hour of searching this site and the Internet I'm waiving the white flag.
5/16" (.3125") D-shaped hole.
After an hour of searching this site and the Internet I'm waiving the white flag.
- martin manning
- Posts: 13250
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: 5/16 Tip Jack Part Number
Standard banana jack.
- dorrisant
- Posts: 2632
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: 5/16 Tip Jack Part Number
deleted
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Re: 5/16 Tip Jack Part Number
Here's what I was using in those chassis, Kobicon 164-R116B & 164-R116R
http://www.mouser.com/ds/2/209/KC-301107-199024.pdf
TM
http://www.mouser.com/ds/2/209/KC-301107-199024.pdf
TM
- UltraHookedOnPhonix
- Posts: 414
- Joined: Thu Dec 15, 2005 9:32 pm
- Location: Dumbleland
Re: 5/16 Tip Jack Part Number
Those are non-stocked at Mouser I'm afraid.ToneMerc wrote:Here's what I was using in those chassis, Kobicon 164-R116B & 164-R116R
http://www.mouser.com/ds/2/209/KC-301107-199024.pdf
TM
These Keystone parts looks like a viable alternative:
Mouser part#: 534-6091 (red)
http://www2.mouser.com/ProductDetail/Ke ... 9ODiwme4hs
Mouser part#: 534-6092 (black)
http://www2.mouser.com/ProductDetail/Ke ... c7gYOuapbc
Re: 5/16 Tip Jack Part Number
Hoffman Amps has those available for sale.
Thanks
Thanks for your input guys but not looking for banana jacks or other size holes. Need a tip jack to fit a 5/16" (.3125") D-shaped hole. If anyone has a source I'd really appreciate it.
Re: Thanks
The Kobicon part numbers that I referenced and have used were taken from the CE chassis CAD drawing, which obviously is setup for the larger form factor banana plug. You will have a hard time finding a 5/16" D mounting pin/tip jack as that mounting is normally .250.Smitty wrote:Thanks for your input guys but not looking for banana jacks or other size holes. Need a tip jack to fit a 5/16" (.3125") D-shaped hole. If anyone has a source I'd really appreciate it.
As UHOP mentioned that Keystone part appears to be a compatible replacement for the Kobicon, but if you have your heart set on only a pin jack, then good luck.
TM
Re: 5/16 Tip Jack Part Number
He wants the pin/tip jack, not a banana jack.....that's the issue.M Fowler wrote:http://www.ebay.com/itm/Insulated-Banan ... 2135.l4275
TM
- glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
Re: 5/16 Tip Jack Part Number
Look on Mouser, they have the Kobicon jacks and I am pretty sure they have both banana and pin style.ToneMerc wrote:He wants the pin/tip jack, not a banana jack.....that's the issue.M Fowler wrote:http://www.ebay.com/itm/Insulated-Banan ... 2135.l4275
TM
This would probably work...
http://www.mouser.com/ProductDetail/Joh ... 6O436Zw%3d
Gary
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
- glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
Re: 5/16 Tip Jack Part Number
Here is the drawing. Looks like it will fit the bill.
You do not have the required permissions to view the files attached to this post.
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
Re: 5/16 Tip Jack Part Number
That part # drawing still looks to be 1/4 to me not 5/16.