I have done a search and found one layout drawing showing a D'lator installed. Does anyone else have a layout showing a D'Lator on board that they would be willing to share or link to?
This is the only one I could find: http://ampgarage.com/forum/viewtopic.php?f=5&t=7370
I am trying to figure out how the grounding is done with the D'Lator on board and whether it is tied into the preamp grounding? And if the FX jacks are insulated from the chassis OR make contact & ground with the chassis.
With respect, 10thtx
D layout & on board effects loop
Moderators: pompeiisneaks, Colossal
Re: D layout & on board effects loop
This layout is from Normster; I used it in a HRM build, it is correct.
You do not have the required permissions to view the files attached to this post.
Re: D layout & on board effects loop
Erwin_ve,
Thanks! Exactly what I was looking for! I very much appreciate the information.
With respect, 10thtx
Thanks! Exactly what I was looking for! I very much appreciate the information.
With respect, 10thtx
- norburybrook
- Posts: 3290
- Joined: Mon Jan 06, 2014 12:47 am
- Location: London
- Contact:
Re: D layout & on board effects loop
replied to wrong post.
-
- Posts: 503
- Joined: Tue Jun 06, 2017 12:20 pm
- Location: Montreal, Canada
D layout & on board effects loop
@10thTx there is also this thread about a super reverb HRM conversion with onboard D-lator by Henri
http://ampgarage.com/forum/viewtopic.php?f=4&t=29813
Fred.
http://ampgarage.com/forum/viewtopic.php?f=4&t=29813
Fred.
You do not have the required permissions to view the files attached to this post.